Why are more and more precision manufacturers switching from conventional pressure nozzles to ultrasonic atomization? The answer lies in a few key comparisons: traditional nozzles shatter liquid with high-pressure, high-speed airflow — inevitably causing overspray, waste and clogging. The ultrasonic atomizer (超音波ネブライザ), by contrast, atomizes with low-energy ultrasonic vibration, producing a slow, gentle, uniform mist. This fundamental difference delivers a string of tangible advantages, driving its rapid adoption in precision applications such as blood collection tube spraying.

Working principle: The ultrasonic generator converts 50/60Hz electrical energy into high-frequency electrical energy, which is delivered to the piezoelectric crystal in the transducer and transformed into high-frequency mechanical vibration. The vibration is amplified by the booster and focused at the nozzle tip — the atomizing orifice. Liquid flows through the booster to the tip, where the high-frequency vibrating tip breaks it into tiny droplets, ejected by air pressure as a slow, soft, uniform mist. Unlike conventional atomizing heads that rely on pressure and high-speed motion to shatter liquid, the ultrasonic atomizer uses relatively low ultrasonic vibration energy. Liquid can be fed by gravity or a low-pressure pump for continuous or intermittent atomization. Atomization throughput depends on liquid feed rate and the atomizer's operating frequency; generally, higher frequency means lower processing capacity, with minimum atomization rates down to 2μl/s. For best results, liquid viscosity should be below 50cps and solids content below 30%. Compared with conventional pressure nozzles, the ultrasonic atomizer's feed channel and orifice are relatively large, achieving clog-free spraying. Droplet size is a function of the transducer's operating frequency — higher frequency means smaller droplets: about 40μm average diameter below 70kHz, and 30μm above 70kHz.

Applications: FPD & TFT display devices, fuel cells, energy (solar photovoltaic cells, lithium battery film deposition), optical lens coating, medical devices (implant coatings, vascular stent coatings, blood collection tube coatings) and more.

Key advantages: reduced material consumption — gentle, controlled atomization delivers material straight to the workpiece, drastically cutting overspray waste; clog-free and corrosion-resistant — relatively large feed channel and orifice prevent clogging by design; ultra-low atomization flow — minimum rates down to 2μl/s for micro-precision spraying; intermittent or continuous operation — start/stop on demand to suit varied production tempos; high precision and controllability — droplet size governed by operating frequency (40μm average below 70kHz, 30μm above), for highly repeatable processes.

Weighing material savings, fewer clogging shutdowns and higher yields together, ultrasonic atomization typically offers better overall economics. Companies evaluating a spraying process upgrade may benchmark their current overspray losses and defect rates against what an atomization solution can deliver.

Blood Collection Tube Ultrasonic Spray Atomization

Blood Collection Tube Ultrasonic Spray Atomization