Ultrasonic atomizer
Ultrasonic spray atomization for blood collection tubes
Working principle:The ultrasonic generator converts 50/60Hz electrical energy into high-frequency electrical energy, which is delivered to the piezoelectric crystals in the transducer and transformed into high-frequency mechanical vibration. The vibration is amplified by the booster and focused on the spray nozzle — the atomization point. Liquid flows through the booster to the nozzle, where the high-frequency vibrating tip shatters it into fine particles that are ejected by air pressure as a slow, soft, uniform mist. Unlike conventional nozzles that atomize liquid through pressure and high-speed motion, the ultrasonic atomizer uses low ultrasonic vibrational energy. Liquid can be fed by gravity or a low-pressure pump for continuous or intermittent atomization. Atomization throughput depends on the liquid feed rate and the atomizer's operating frequency; generally, a higher frequency means lower processing capacity, with minimum atomization rates down to 2μl/s.For best atomization results, liquid viscosity should be below 50cps and solids content below 30%.Compared with conventional pressure nozzles, the ultrasonic atomizer's feed channel and orifice are relatively large, giving clog-free spraying.Droplet size is a function of the transducer's operating frequency — the higher the frequency, the smaller the droplets: below 70kHz the average droplet diameter is 40μm, above 70kHz it is 30μm.
Applications:Display devices (FPD & TFT), fuel cells, solar PV cells, lithium battery film deposition, optical lens coating, medical devices (implant coatings, vascular stent coatings, blood collection tube coatings) and more.
Key advantages:Reduced material consumption, no overspray waste, intermittent or continuous operation, ultra-low spray flow rate, clog-free and corrosion-resistant, high precision and high controllability.