The ultrasonic atomizer (超音波ネブライザ) is a precision spraying device that atomizes liquid with ultrasonic vibration energy — fundamentally different from conventional nozzles that shatter liquid with high pressure and high-speed airflow. Known for its slow, gentle and uniform atomization with fine, controllable droplets, it excels in precision coating applications with demanding uniformity and material-utilization requirements, and is one of Jingjin Precision Machinery's flagship products for precision coating.
Working principle: The ultrasonic generator converts 50/60Hz electrical energy into high-frequency electrical energy, which is delivered to the piezoelectric crystal in the transducer and transformed into high-frequency mechanical vibration. The vibration is amplified by the booster and focused at the nozzle tip — the atomizing orifice. Liquid flows through the booster to the tip, where the high-frequency vibrating tip breaks it into tiny droplets, ejected by air pressure as a slow, soft, uniform mist. Unlike conventional atomizing heads that rely on pressure and high-speed motion to shatter liquid, the ultrasonic atomizer uses relatively low ultrasonic vibration energy. Liquid can be fed by gravity or a low-pressure pump for continuous or intermittent atomization. Atomization throughput depends on liquid feed rate and the atomizer's operating frequency; generally, higher frequency means lower processing capacity, with minimum atomization rates down to 2μl/s. For best results, liquid viscosity should be below 50cps and solids content below 30%. Compared with conventional pressure nozzles, the ultrasonic atomizer's feed channel and orifice are relatively large, achieving clog-free spraying. Droplet size is a function of the transducer's operating frequency — higher frequency means smaller droplets: about 40μm average diameter below 70kHz, and 30μm above 70kHz.
Applications: FPD & TFT display devices, fuel cells, energy (solar photovoltaic cells, lithium battery film deposition), optical lens coating, medical devices (implant coatings, vascular stent coatings, blood collection tube coatings) and more.
Key advantages: reduced material consumption, no overspray waste, intermittent or continuous operation, ultra-low atomization flow rates, clog-free and corrosion-resistant, high precision, high controllability.
With its clog-free, large-channel nozzle structure and precisely adjustable atomization output, the ultrasonic atomizer is widely used across precision electronics, medical and new-energy industries. Whether running continuously or intermittently, it delivers soft, uniform atomization that saves material while ensuring coating consistency — an ideal upgrade from conventional spraying processes.