Blood Collection Tube Ultrasonic Spray Atomization

The real value of the ultrasonic atomizer (超音波ネブライザ) shows in the demanding industries it serves: display panels, photovoltaic cells, lithium batteries, medical devices — all sharing the need for uniform coatings, expensive raw materials and extremely high yield requirements. Conventional pressure nozzles suffer from overspray, clogging and waste, while ultrasonic atomization's slow, gentle, uniform mist hits exactly these pain points. In blood collection tubes, the uniformity of the inner-wall anticoagulant coating directly affects test accuracy.

Working principle: The ultrasonic generator converts 50/60Hz electrical energy into high-frequency electrical energy, which is delivered to the piezoelectric crystal in the transducer and transformed into high-frequency mechanical vibration. The vibration is amplified by the booster and focused at the nozzle tip — the atomizing orifice. Liquid flows through the booster to the tip, where the high-frequency vibrating tip breaks it into tiny droplets, ejected by air pressure as a slow, soft, uniform mist. Unlike conventional atomizing heads that rely on pressure and high-speed motion to shatter liquid, the ultrasonic atomizer uses relatively low ultrasonic vibration energy. Liquid can be fed by gravity or a low-pressure pump for continuous or intermittent atomization. Atomization throughput depends on liquid feed rate and the atomizer's operating frequency; generally, higher frequency means lower processing capacity, with minimum atomization rates down to 2μl/s. For best results, liquid viscosity should be below 50cps and solids content below 30%. Compared with conventional pressure nozzles, the ultrasonic atomizer's feed channel and orifice are relatively large, achieving clog-free spraying. Droplet size is a function of the transducer's operating frequency — higher frequency means smaller droplets: about 40μm average diameter below 70kHz, and 30μm above 70kHz.

Applications: FPD & TFT display devices — precision coating in panel processes; fuel cells — uniform spraying of membrane electrode components; energy — functional thin-film preparation for solar photovoltaic cells and lithium battery deposition; optical lens coating — optical surfaces with extreme uniformity demands; medical devices — implant coatings, vascular stent coatings, blood collection tube coatings and more.

Key advantages: reduced material consumption, no overspray waste, intermittent or continuous operation, ultra-low atomization flow rates, clog-free and corrosion-resistant, high precision, high controllability.

From display panels to vascular stents, from photovoltaics to blood collection tubes, the application map of ultrasonic atomizers keeps expanding. Wherever a process involves "laying liquid down as a uniform thin film," it deserves consideration — especially when materials are costly and yield is critical, every drop it saves is real profit.

Blood Collection Tube Ultrasonic Spray Atomization

Blood Collection Tube Ultrasonic Spray Atomization