Product Details:

☆ Application: Eaton dual-clutch transmission valve body test station C

☆ Function: leak detection test
☆ Workpiece loading: manual load/unload
☆ Master control: differential-pressure leak tester
☆ Cycle time: 1 minute
☆ Control system: PLC operated
☆ Drive system: pneumatic

☆ Audio-visual alarm: mistake-proof alarm system + indicator light with buzzer
☆ Safety protection: safety light curtain

Technical Specifications


Differential pressure Min. display value 0.1Pa (standard)
Display accuracy ±5% of R.D. ±1Pa
Display range 999Pa standard (±1.5kPa when kPa unit is selected)
Sensor pressure rating 5MPa
Display units Test pressure kPa, MPa (kg/cm2, PSI and other non-SI units available for overseas users)
Leak rate mL/min, mL/s, Pa, kPa (mmH2O and other non-SI units available for overseas users)
Leak rate display 3 digits (shiftable decimal point), 10 responses/sec
Channels 32ch (0–31)
Time setting range 999.9 s (0.1 s resolution)
Power supply AC100~240V±10%, 50/60Hz, 100VAmax
Test pressure source Use clean air; the source pressure must be well above the test pressure.
Drive pressure source 400–700kPa clean air; use 500–700kPa air for high-pressure applications.
CPU 16-bit CPU
Piping diameter Rc1/4 (air source, test piece & master part piping)
Rc1/8 (drive pressure source)
Ambient temperature 5~40℃
(Note) Please consult us when using the instrument under high-temperature conditions.
Humidity Below 80%RH
Weight Approx. 9kg
Serial interface COM1 (RS-232C) (selectable output format) I/F, ID/F fixed length
Output selection setting
Also outputs setting values in addition to leak data.
T/F fixed output
Standard setting
Outputs leak data only — same as our DF/MC/DC-720 controller.
Printer interface: CENTRONICS (Output data) Judgment result, leak rate, corrected test pressure value, WK#, CH# and others.
Analog output Differential pressure: F.S. 1VDC; Test pressure: F.S. 1VDC
Accessories Oil mist separator (except for high / extra-high pressure models), mounting bracket, communication interfaces, power cord (3m), inspection report, operation manual.

Water & Air Tightness Testing EquipmentWater & Air Tightness Testing EquipmentWater & Air Tightness Testing Equipment

Our high-precision air tightness testers are mainly used for leak detection such as:

1. Automotive engines: cylinder blocks, cylinder heads, water pumps, oil pumps, brake pumps, intake/exhaust pipes, oil and water tanks.

2. General parts: valves, mechanical seals, pumps, washing machine motors, refrigeration and heat-exchange equipment.

3. Drums, tanks, packaging containers and all products requiring airtight sealing.

We welcome your call for consultation. Jingjin Precision Machinery develops customized solutions for your specific requirements, producing economical and reliable high-precision air tightness testing equipment for every special need.