Common Ultrasonic Welding Functions:
    Ultrasonic welding: a horn (HORN) vibrating at ultrasonic ultra-high frequency generates frictional heat at the joint surfaces of two plastic parts under moderate pressure, melting and joining them instantly, achieving complete water- and air-tight seals.

    Ultrasonic riveting: the horn (HORN) vibrating at ultrasonic ultra-high frequency presses against a protruding stud on the plastic part, instantly melting it into a rivet-head shape so the metal object is riveted in place.

    Ultrasonic inserting: using ultra-high-frequency ultrasonic vibration transmitted through the horn (HORN) with appropriate pressure, metal parts (such as nuts and screws) are instantly pressed into pre-formed plastic holes and fixed at a set depth. After completion, both tensile and torsional strength rival those of traditional in-mold-formed parts, while avoiding the drawbacks of injection molding damage and slow injection cycles.
Ultrasonic spot welding: when two plastic parts must be welded but the part conditions do not allow an energy director, spot welding can be used. Its principle is to transmit ultrasonic energy to the horn tip, penetrating from the upper plate to the lower plate to achieve the weld, and dozens of spots can be welded at once to boost efficiency.

    Ultrasonic trimming: a horn vibrating at ultrasonic high speed cuts off sharp burrs on injection-molded plastic parts and cuts off the injection gate, separating the plastic parts from the injection runner instantly - saving manual trimming and leaving the parts smooth and attractive. Materials suitable for ultrasonic trimming include ABS, PS, acrylic, PC , POM, etc. Plastics that are too soft or elastic are not suitable for ultrasonic trimming. (Results are poor if the plastic is trimmed right after injection molding, before it has cooled.)

    Ultrasonic forming: similar to ultrasonic riveting. A concave horn presses against the outer ring of the plastic part; after high-frequency vibration melts the plastic, it forms around and encapsulates the metal object to fix it in place, with a smooth, attractive appearance. Mostly used for fixing electronic parts and loudspeakers, and for cosmetic lens mounting.