In modern society, plastic products of all kinds have permeated every aspect of daily life and are widely used in aviation, marine, automotive, electrical appliances, packaging, toys, electronics, textiles and other industries. However, due to limitations of the injection molding process, a considerable number of complex-shaped plastic products cannot be molded in one shot and need to be joined — yet the long-used plastic bonding and heat-sealing processes are quite outdated: inefficient, and the adhesives are somewhat toxic, raising environmental pollution and worker-protection issues. Such traditional processes can no longer meet the needs of the modern plastics industry, so a novel plastic processing technology — ultrasonic plastic welding — has stood out with its advantages of high efficiency, high quality, attractive appearance and energy saving. When welding plastic products, an ultrasonic plastic welding machine needs no adhesives, fillers or solvents and consumes no large amount of heat, offering easy operation, fast welding speed, high weld strength and high production efficiency. Ultrasonic welding technology is therefore being adopted ever more widely.
    I. How an ultrasonic plastic welding machine works.
    When ultrasound acts on the contact surfaces of thermoplastic parts, it produces high-frequency vibration tens of thousands of times per second. This high-frequency vibration, at a certain amplitude, transmits ultrasonic energy through the upper part into the weld zone. Because the weld zone — the interface between the two parts being welded — has high acoustic resistance, localized high temperature is generated. And since plastics conduct heat poorly, the heat cannot dissipate in time and accumulates in the weld zone, rapidly melting the contact surfaces of the two plastics; with a certain pressure applied, they fuse into one. After the ultrasound stops, the pressure is held for a few seconds to let the joint solidify, forming a strong molecular chain and achieving the weld, with weld strength approaching that of the base material. The quality of ultrasonic plastic welding depends on three factors: the amplitude of the transducer horn, the applied pressure and the weld time. Weld time and horn pressure are adjustable; amplitude is determined by the transducer and booster. These three quantities interact, and each has an optimum value: if the energy exceeds the optimum, the plastic melts too much and the part deforms easily; if the energy is too low, the weld will not hold, and the applied pressure should not be too high either. The optimum pressure is the product of the weld edge length and the optimum pressure per 1 mm of edge.
    II. Ultrasonic plastic welding methods
        1. Inserting — to insert a nut or other metal part into a plastic workpiece: ultrasound is first transmitted to the metal; through high-speed vibration the metal part is driven directly into the molded plastic while the plastic melts around it, and the insert is complete once it solidifies.
        2. Welding — ultrasonic vibration is conducted through the horn to the workpieces; since the interface between the two workpieces has high acoustic resistance, localized high temperature is generated, melting the interface. Under a certain pressure, the two parts achieve an attractive, fast and strong welded joint.
        3. Riveting — to join metal to plastic, or two plastics of different properties, ultrasonic riveting can be used, giving joints that resist embrittlement and are attractive and strong.
        4. Spot welding — a small horn is used to spot-weld two large plastic products at separate points, or a toothed horn presses directly onto the two plastic workpieces to achieve spot welding.
        5. Forming — ultrasound instantly melts and forms the plastic workpiece; when the plastic solidifies, metal or other materials are held firmly in place.
        6. Cutting — using a specially designed horn and base, when a plastic part has just been molded it is pressed directly onto the part's sprue, and ultrasonic energy cuts it off.
    III. Components of an ultrasonic plastic welding machine and their functions — an ultrasonic plastic welding machine consists of a pneumatic transmission system, a control system, an ultrasonic generator, a transducer and tool head, and mechanical devices.
        1. Pneumatic transmission system — includes: filter, pressure-reducing valve, oil mister, directional valve, throttle valve, cylinder, etc. In operation, an air compressor first drives the stroke cylinder to move the ultrasonic transducer vibration system up and down; the driving air pressure is set according to welding needs for low- to medium-power ultrasonic welding.
        2. Control system — the control system consists of time relays or integrated-circuit timers. Its main functions are: first, to control the pneumatic transmission system so that, under timer control, the air valve opens during welding, the cylinder pressurizes and the horn descends to press the workpieces with a certain pressure; after welding, pressure is held for a while, then the control system reverses the air valve and the horn retracts. Second, to control the operating time of the ultrasonic generator. This system automates the entire welding process: the operator only presses a start button to generate a trigger pulse, and the complete welding cycle runs automatically. The control sequence is: power on — trigger control signal — pneumatic transmission system: cylinder pressurizes, horn descends and presses the workpieces — trigger ultrasonic generator, emit ultrasound and hold for the set weld time — stop ultrasound emission — continue holding pressure for a set time — release pressure, horn retracts, welding ends.
        3. Ultrasonic generator
                1) For higher-power ultrasonic plastic welding machines, the generator signal uses a phase-locked automatic frequency-tracking circuit so that the generator output frequency stays essentially equal to the transducer's resonant frequency.
                2) For ultrasonic plastic welding machines over 500 W, the generator uses a self-excited power oscillator, which also has a certain frequency-tracking capability.
    4. Acoustic system of the ultrasonic plastic welding machine
                1) Transducer — the acoustic system of an ultrasonic plastic welding machine has three parts: 1. the driving section, 2. the fixing section, 3. the working section. The drive is the core, generally a bolt-clamped longitudinal-vibration transducer: a half-wavelength longitudinal vibrator joined with a quarter-wavelength longitudinal vibrator and a half-wavelength concentrator forms a full-wavelength plastic welding transducer, while a quarter-wavelength longitudinal vibrator joined with a quarter-wavelength concentrator forms a half-wavelength transducer.
                2) Tool head — different welding jobs need different tool heads; whether near-field or far-field welding, only a half-wavelength tool head lets the welding face reach maximum amplitude. Tool heads come in amplitude-amplifying and non-amplifying types. For plastic welding machines, the acoustic-system tool head is usually made of aluminum alloy with a hard-alloy-plated face; for higher power, titanium alloy is also used, whose fatigue strength is more than twice that of aluminum alloy.
    IV. Models and specifications of ultrasonic plastic welding machines
Because applications and materials differ and weld sizes vary, ultrasonic plastic welding machines come in many specifications. Output power ranges from tens of watts for hand-held welders to several kilowatts for large machines, with frequencies generally between 15 kHz and 40 kHz.