I. Summary
    Ultrasonic welding is a high-tech process for bonding thermoplastic products. All kinds of thermoplastic parts can be ultrasonically welded without solvents, adhesives, or other auxiliaries. Its advantages include multiplying production rates, reducing costs, improving product quality, and ensuring safe production.
    The principle of ultrasonic plastic welding is as follows: the generator produces a high-voltage, high-frequency signal at 20 kHz (or 15 kHz), which the transducer system converts into high-frequency mechanical vibration applied to the plastic workpiece. Friction between the surface and internal molecules of the workpiece raises the temperature delivered to the joint interface; when the temperature reaches the melting point of the workpiece, the joint interface melts rapidly and fills the gaps at the interface. When the vibration stops, the workpiece cools and sets under pressure, producing a perfect weld.

    II. Materials and Their Ultrasonic Weldability
ABS
    Acrylonitrile-butadiene
    styrene copolymer: lightweight, combining toughness, rigidity, and chemical resistance; widely used. This material conducts heat well and is especially well suited to ultrasonic welding.
    General purpose ps
    General-purpose polystyrene: low specific gravity, strong resistance to water and chemicals, stable with excellent insulation; especially suitable for injection and extrusion molding. Commonly used in toys, decorations, sanitary equipment, bowls, lenses, floats, and similar products. Its high elastic modulus makes it well suited to ultrasonic welding.
    Acrylics
    Acrylic: hard, impact-resistant, and unaffected by acids, with high optical clarity and good colorability. Commonly used in automotive tail lights, dashboards, medals, faucet handles, etc. When ultrasonic welding, watch for loss of transparency.
    Impact ps
    High-impact polystyrene
    Acetal
    Acetal: high tensile and compressive strength, good wear resistance, and excellent toughness and rigidity; commonly used for zippers, screws, bearings, rollers, kitchen utensils, etc. Because of its low friction coefficient, ultrasonic welding requires high vibration amplitude and longer weld times.
    20-30% glass Filled PS
    Glass-fiber-reinforced polystyrene
    Celluloeics
    Cellulosic esters: the material tends to change color under ultrasonic vibration, and the contact surface does not absorb energy easily, making welding difficult.
    Unmodified PP
    Polypropylene: low specific gravity, good insulation, high strength, and resistant to heat and chemical attack; can be drawn into fibers for ropes and similar textiles. Products include toys, luggage, audio housings, electrical insulation, food packaging, etc. Because of its low elastic modulus, it attenuates ultrasonic vibration easily and is difficult to weld.
    Noryl
    Polyphenylene oxide (PPO): extremely tough, with excellent electrical properties and high insulation; commonly used for electronic parts. Because of its high melting point, it requires long weld times and high amplitude.
    Filled PP (reinforced polypropylene)
    Nylon
    Nylon: strong and tough, wear-resistant, with an extremely low friction coefficient and acid resistance; commonly used for bearings, gears, pipes, kitchen utensils, brushes, etc. In ultrasonic welding, its high melting point means long weld times are needed; drying the material before welding makes it easier to weld.
    PVC
    PVC (polyvinyl chloride): good electrical properties, resistant to weak chemicals, good low-temperature performance, and flame-retardant; commonly used for synthetic leather hoses, films, and similar products. The material is soft, attenuates ultrasonic vibration easily, and the weld surface tends to degrade.
    P.C.
    Polycarbonate: heat-resistant, with excellent transparency and high tensile and flexural strength; commonly used for lenses, heat pipes, filters, etc. Its high melting point requires long weld times. Because the material is hygroscopic, it should be dried before welding.
    Polyester; requires high welding energy
    High Density PE
    High-density polyethylene: low specific gravity, flexible at low and room temperatures, waterproof and corrosion-resistant, available in many colors, and inexpensive; commonly used for bowls, packaging films, soft water pipes, baby bottles, soft ropes, etc. The higher the density, the better suited it is to ultrasonic welding.
    Polysulfone
    Polysulfone: hard and strong, tough, with electrical properties unaffected by long-term heating; commonly used for TV component covers, motor parts, etc. Its high melting point requires high welding energy.
    Low Density PE
    Low-density polyethylene
    Polypheny lene Qxide(ppO)
    Polyphenylene oxide (PPO): heat- and moisture-resistant, chemical-resistant, and steam-proof; commonly used for terminals, rotors, housings, impellers, pipe fittings, etc. Its high melting point requires high welding energy.
    Jingjin Precision Machinery specializes in manufacturingultrasonic welding machines|ultrasonic plastic welding machines|hot plate welding machines|hot melt machines|spin welding machines|ultrasonic spot welders|ultrasonic molds and fixtures|