Ultrasonic welding technology
Ultrasonic welding forms a seam through mechanical high-frequency vibration. The parts to be assembled are clamped under pressure between an oscillating horn and a fixed horn, then subjected to ultrasonic vibration at a frequency of 20-40 KHz applied at a right angle to the contact surface. The alternating high-frequency stress generates heat at the seam interface, forming a high-quality weld. The tooling for this process is very expensive, so it is best suited to high-volume production. This welding method is only suitable for small parts with a weld length of no more than a few centimeters. Applications include welding valves and screening devices for medical equipment on multi-head machines, housings, auto parts, vacuum cleaner housings and more.
Friction welding technology
Thermoplastic friction welding (also called "spin welding") follows the same principle as metal welding. In this process, one substrate is fixed while the other rotates at a controlled angular speed. When the parts are pressed together, frictional heat melts the polymer, and a weld forms upon cooling. The main welding parameters include: rotation speed, friction pressure, forging pressure, welding time and melt length. Friction welding produces excellent weld quality with a simple, highly repeatable process. But precisely because the process is simple, it is only suitable for applications where at least one part is round and no angular alignment is required.
Vibration welding technology
Vibration welding is also called linear friction welding. Two thermoplastic parts rub against each other under appropriate pressure, frequency and amplitude until enough heat is generated to melt the polymer. When the vibration stops, the parts are aligned with each other, and the molten polymer solidifies to form a weld. Vibration welding is similar to spin welding, except that the motion is linear rather than rotational. This welding method is very fast, with vibration frequencies generally between 100-240 Hz and amplitudes of 1-5 mm. The main advantage of this process is the ability to weld large, complex linear parts at high speed. Other advantages include: simultaneous welding of multiple parts, simple welding tooling, and the ability to weld almost all thermoplastic materials — including injection molded, extruded, blow molded, thermoformed, foamed and stamped parts — mainly used in the automotive and home appliance industries.