In 1881, the Curie brothers experimentally verified the inverse piezoelectric effect, giving the same direct and inverse piezoelectric constants for quartz. In 1894, Voigt pointed out that only crystals of the twenty point groups without a center of symmetry could possibly exhibit the piezoelectric effect; quartz is a representative piezoelectric crystal and was put into use. During World War I, Langevin, heir to the Curies, first used the piezoelectric effect of quartz to build an underwater ultrasonic detector for detecting submarines, opening the chapter of piezoelectric applications.
The epoch-making progress in piezoelectric materials and their applications should be attributed to the discovery of BaTiO3 ceramics during World War II. In 1947, Roberts in the United States applied high voltage to BaTiO3 ceramics for poling treatment, obtaining the piezoelectricity of piezoelectric ceramics; subsequently, Japan actively carried out application research using BaTiO3 piezoelectric ceramics to make ultrasonic transducers, high-frequency transducers, pressure sensors, filters, resonators and various other piezoelectric devices — research that continued into the mid-1950s.
In 1955, B. Jaffe and others in the United States discovered PZT piezoelectric ceramics with superior piezoelectricity to BaTiO3, pushing application research of piezoelectric devices a big step forward. Some uses that were hard to commercialize in the BaTiO3 era — especially piezoelectric ceramic filters and resonators — were rapidly commercialized with the advent of PZT; SAW devices such as filters, delay lines and oscillators using surface acoustic waves (SAW) were also commercialized in the late 1970s.
Performance comparison of four piezoelectric materials
| g | ε | d | g | k | Curie point °C |
| Crystal (quartz) | 4.5 | 2.3 | 53 | 10 | 1200 |
| Rochelle salt | 200 | 165 | 93 | 54 | 40 |
| Barium titanate | 1700 | 190 | 12 | 45 | 120 |
| Lead zirconate titanate | 2100 | 410 | 22 | 65 | 300 |
Table 1 shows that lead zirconate titanate is currently the best-performing and most widely used material; through modification its performance can be further improved, and it can be used to make all kinds of piezoelectric devices. In the early 1970s, based on the binary lead zirconate titanate formulation Pb(ZrTi)O3, researchers developed ternary piezoelectric ceramic formulations with a third modifying component, such as the lead magnesium niobate system Pb(Mg1/3Nb2/3)(ZrTi)O3, widely used in pickups, microphones, filters, transformers, ultrasonic delay lines and ignition/detonation; and the lead zinc niobate system Pb(Zn1/3Nb2/3)(ZrTi)O3, mainly used to make high-performance ceramic filters and transducers for mechanical filters. In recent years, quaternary piezoelectric ceramic materials have been developed on the basis of ternary formulations, such as Pb(Ni1/3Nb2/3)(Zn1/3Nb2/3)(ZrTi)O3 and Pb(Mn1/2Ni1/2)(Mn1/2Zr1/2)(ZrTi)O3, which can be used to make filters and receivers.