Tuning a hand-held ultrasonic spot welder:
1. The hand-held ultrasonic plastic welding machine has been tuned before leaving the factory; if nothing is abnormal, turn on the power, adjust the weld time to a suitable position, and use it directly.
2. Fault analysis:
When the system is powered on, the fuse blows — power cord short circuit. When the power switch is turned on, the power indicator does not light (1. power not really connected; 2. rectifier bridge broken; 3. power switch or indicator broken; 4. fuse blown;)
When the power switch is turned on, the power indicator lights but there is no ultrasound (1. abnormal voltage; 2 poor transducer cable contact; 3. micro switch broken; 4. transducer broken; 5. die head broken; 6. loose transducer/die head connection; 7. poor contact of circuit board connectors;)