Principles of the machining process specification for ultrasonic plastic welder tooling
(1) Roughing: remove most of the cutting allowance of the formed part blank with high-speed, heavy cuts, bringing dimensions close to the finished size and leaving only a small allowance for semi-finishing or finishing.
(2) Semi-finishing: eliminate the errors left by roughing to approach the accuracy required for finishing, leaving only a small machining allowance for finishing so as to further improve precision.
(3) Finishing: machine the small allowance left by semi-finishing to fully meet the dimensional accuracy, positional accuracy and surface roughness requirements of the formed part.
(4) For formed parts requiring surface roughness Ra of 0.4 µm or less, super-finishing — i.e., mirror polishing — shall be performed. Super-finishing only reduces the roughness of the formed surface; it does not correct geometric dimensions or relative positions !
Please note: the allowances for roughing, semi-finishing and finishing are determined by each shop's machining practices and equipment condition.
PreviousComparison of Ultrasonic Transverse and Longitudinal Wave FieldsNextDevelopment History of Ultrasonic Piezoelectric Ceramics