PC Polycarbonate 
    Chemical and Physical Properties: 
    PC is an amorphous engineering material with particularly good impact strength, thermal stability, gloss, bacterial inhibition, flame retardancy, and stain resistance. PC's notched Izod impact strength (otched Izod impact stregth) is very high, and its shrinkage is very low, typically 0.1%-0.2%. 
    PC has good mechanical properties but poor flow characteristics (you3 hen3 hao3 de0 ji1 xie4 te4 xing4 _dan4 liu2 dong4 te4 xing4), so injection molding of this material is difficult. When selecting the grade of PC material, base it on the final expectations of the product. If the part requires high impact resistance, use low-flow-rate PC material; otherwise, high-flow-rate PC material can be used, (cai liao _) which optimizes the injection molding process. 
    Plastic Injection Mold Process Conditions: 
    Drying: PC material is (cai liao ju) hygroscopic, so drying before processing is important. Recommended drying conditions are 100C to 200C for 3-4 hours. Moisture before processing must be below 0.02%. 
    Melt temperature: 260-340C. 
    Mold temperature: 70-120C. 
    Injection pressure: Use as high an injection pressure as possible. 
    Injection speed: Use low-speed injection for small gates, and high-speed injection for other gate types. 
    Typical Uses: 
    Electrical and commercial equipment (computer components (dian qi he shang ye she bei _ji suan ji yuan jian), connectors, etc.), appliances (food processors, refrigerator drawers, etc.), transportation industry (vehicle head and tail lights, instrument panels, etc.).