High-Frequency Welding:
Unlike induction welding, high-frequency welding (dielectric welding) applies a high-frequency electromagnetic field (13~120MHz) directly to the plastic, melting it through dielectric heating to form the weld. During welding, the plastic parts sit between two metal electrodes that generate the high-frequency field (contact electrodes carry the high-frequency current to the weld), and are welded together by the heating of the high-frequency alternating field combined with the clamping action of the electrodes. This dielectric heating heats uniformly through the material, producing a uniform weld.
The heat a plastic gains in a rapidly alternating electric field depends on certain properties of the material itself, such as its dimensions and dipole moment. High-frequency welding is most effective on plastics with a high dielectric loss factor, such as ABS and PVC, but it cannot weld thermoplastics with a low dielectric loss factor, such as polyethylene and polystyrene. The process is mainly used for welding films and thin sheets and is easy to automate. High-frequency welding can produce complex weld geometries, and the resulting weld strength can equal that of the base material. It is fast, but equipment costs are high.
The high-frequency generator can be controlled by an external programmable controller, and a built-in arc detection component can identify potential weld problems, cutting off the high-frequency power within milliseconds when necessary, so weld quality is reliably assured. The main factors affecting high-frequency weld quality are: 1) the type and dimensions of the plastic; 2) the surface condition of the base plastic; 3) welding parameters — frequency, welding power, heating time, pressure hold time, welding pressure, electrode penetration depth, etc.; 4) the shape and dimensions of the welding tool electrode face.
High-frequency welding is used for automotive airbags, instrument panels, seats, and interior panels.
Laser Welding:
Laser welding is a new, highly efficient plastic welding method. One prerequisite for laser welding is that one of the two parts must transmit the laser while the other must absorb the beam. Laser welding can join thermoplastic parts with different absorption characteristics. Before welding begins, the parts touch each other but are not under the external pressure required by other welding methods — the pressure needed comes from thermal expansion of the plastic melt. During welding, a high-performance laser emits a beam that passes through the laser-transparent part and activates the surface of the absorbing material, which converts it into heat. Absorption of the laser beam creates a minute amount of heat, wetting the absorbing part and increasing the thermal contact points (areas) between the two parts . The laser-transparent part is also heated and melted by heat conducted from the absorbing part, ultimately forming an instantaneous permeating weld between the two materials.
Compared with conventional methods such as hot gas welding, diode lasers generate very little heat during processing and never touch the workpiece. They also minimize collateral damage and can process parts with complex shapes (even three-dimensional forms), reaching areas other welding methods cannot. Because they can be focused on specific locations and switched on and off almost instantly, they are very easy to control.
Laser welding also produces no weld flash; joints are strong and clean, with weld strength similar to hot plate and vibration welding. The absence of residue makes laser welding well suited to automotive products and other electronic sensors. It also greatly reduces vibration stress and thermal stress in the product — less than with other joining methods — meaning internal components of the product or device age more slowly.
Laser welding can weld films, sheets, and molded plastics. It is being used to manufacture electronic door openers for Mercedes-Benz cars. Other applications include motor-driven transmissions on automotive air intake manifolds, central locking systems, gearboxes, actuator housings, airbags, oil pressure and engine sensors, large integrated sensors, vehicle cockpits, pressure vessels, interior trim parts, and bumpers.