Non-woven sewing machines cut and form in one pass — no fraying, easy pattern-wheel changes, endless pattern styles, fast speed, no preheating, no temperature adjustment needed.
Functions: cutting, sewing, edge trimming, forming, embossing, hot stamping, punching, slitting, etc. Main uses: chemical fiber fabrics, nylon cloth, knitted fabrics, non-wovens, spray-bonded cotton, PE paper, PE + aluminum, PE + cloth composites. Application examples: lace suits, lace underwear, flower packaging ribbons, tents, raincoats, umbrellas, tablecloths, handkerchiefs, non-woven masks, motorcycle helmets, crafts, etc. Ultrasonic lace sewing machine model specifications — output power: 1500W cutting speed: 5-20M/MIN frequency: 20KHZ cutting width: 75MM power supply: 220V/6A machine dimensions: 1200*600*1100 weight: 115KG 
    Operating precautions: 
    1. Regular inspection of the die head: (1) the parallelism between the die head face and the pattern wheel must be checked regularly — generally their parallelism must be under 0.02 mm; adjust before working if it exceeds this standard. (2) If the working face of the die head is worn and dented, causing poor cutting of the fabric, remove the die head and grind the working face.
    Note: an uneven die head can be reground several times, but the cumulative grinding amount must not exceed 2 mm, otherwise the die head will be scrapped because its working frequency changes and the surface hardened layer disappears. (3) Check that the die head matches the working frequency of the ultrasonic generator assembly: Note: check this every morning before starting work. Method: turn on the power switch, then move the test switch board toward "ultrasonic test"; if any of the following occurs, correct the frequency: A. touching the die head working face lightly with your hand, the ultrasonic amplitude feels weak B. abnormal noise is produced C. the die head heats up abnormally D. the ammeter on the generator assembly panel swings excessively. Adjustment: use a flat-head screwdriver on the tuner on the panel to fine-tune frequency grid by grid (generally no more than 45° clockwise or counterclockwise) until the ammeter pointer swings minimally and the above symptoms disappear. If it still cannot work after correction, do not step on the foot switch; cut the power and stop working, otherwise the equipment will be damaged.
    2. Pattern wheel inspection: the pattern wheel's pattern must stay sharp, with hardness kept at Rockwell 50–55. Inferior, worn or rusted pattern wheels must not be used, to avoid affecting product quality or accelerating die head wear from excessive pattern wheel pressure.
    3. Pressure control: the pressure the machine needs during operation is generally determined by the following factors: (1) if the pattern wheel's pattern is complex, increase the pressure slightly. (2) if the pattern wheel's pattern is not sharp enough, increase the pressure slightly.
Pressure.