Nonwoven filter bags are a type of liquid filter bag, made mainly from dedicated liquid filter media manufactured abroad to the industry’s highest standards, or by the same manufacturer in its wholly owned domestic plants. The filtrate-facing surfaces are all specially singed, which effectively prevents fiber shedding from contaminating the filtrate while avoiding the pore over-blocking of traditional roller-pressing that shortens filter bag life. All raw materials are in their natural white color with no special bleaching or dyeing, fully meeting environmental standards. Thanks to the three-dimensional filtration layer of needle-punched felt, particles are retained on the inner-wall surface and deep within the filter bag by depth-filtration mechanics as liquid flows through, giving high capture efficiency for solid or colloidal particles. Uniform felt thickness, stable porosity, and ample strength keep the filter bags efficient and extend their service life. The bottom, sides, and collar ring of liquid filter bags are all joined by hot-melt welding; the bypass leakage from needle holes and uneven materials and the fiber shedding problems of traditionally sewn filter bags are all solved by these fully hot-melt welded filter bags. High-precision seamless filter bags are made with digital synchronized multi-point welding equipment, ensuring every weld point is equally strong and consistent. This keeps the filter bags unaffected by other production consumables and ensures material consistency in every bag - suitable for more demanding industries.
    Air Filter Welding Equipment Details: 
    The machine is equipped with heating heads for the two ends of the cartridge and two heating heads for the end caps; each heating head has an electric power of 500 W, 2000 W in total. The positioning movement of the cartridge end caps and the heaters is cylinder-driven, bringing the heated surfaces of the cartridge ends and end caps into contact with the heater faces to melt them; the heated surfaces are then quickly bonded together and solidified as one. These moving parts include the cartridge feeding mechanism, end-cap clamping manipulator, heater lifting mechanism, and pressing device, combined by design into the complete machine. All mechanisms are pneumatically driven. In line with the new welding process requirements of plastic welding machines, this equipment uses an automatic control system with a programmable logic controller (PLC) and a touchscreen HMI - simple, precise, and reliable to operate.