Features of non-woven bag ultrasonic welding:
    One-pass cutting and forming — no fraying, easy pattern-wheel changes, endless pattern styles, fast speed, no preheating, no temperature adjustment needed. Functions: cutting, sewing, edge trimming, forming, embossing, hot stamping, punching, slitting, etc. Main uses: chemical fiber fabrics, nylon cloth, knitted fabrics, non-wovens, spray-bonded cotton, PE paper, PE + aluminum, PE + cloth composites. Application examples: lace suits, lace underwear, flower packaging ribbons, tents, raincoats, umbrellas, tablecloths, handkerchiefs, non-woven masks, motorcycle helmets, crafts, etc. 
    Notes on the non-woven lace machine die head:
    An uneven die head can be reground several times, but the cumulative grinding amount must not exceed 2 mm, otherwise the die head will be scrapped because its working frequency changes and the surface hardened layer disappears. Also check that the die head matches the working frequency of the ultrasonic generator assembly.     
    Inspecting the non-woven lace machine die head: 
    Turn on the power switch, then move the test switch board toward "ultrasonic test"; if any of the following occurs, correct the frequency: A. touching the die head working face lightly with your hand, the ultrasonic amplitude feels weak B. abnormal noise is produced C. the die head heats up abnormally D. the ammeter on the generator assembly panel swings excessively. Adjustment: use a flat-head screwdriver on the tuner on the panel to fine-tune frequency grid by grid (generally no more than 45° clockwise or counterclockwise) until the ammeter pointer swings minimally and the above symptoms disappear. If it still cannot work after correction, do not step on the foot switch; cut the power and stop working, otherwise the equipment will be damaged.