Ultrasonic Cleaning in the Bearing Industry

Parts cleaned: various bearing components
Ultrasonic Cleaning Machine for Bearing Industry

Contaminants:
dust particles, oil stains, etc.

Cleaning requirement:
Remove grease and oil from stainless-steel bearings without using CFCs, achieving the same cleanliness as conventional solvent cleaning.

Previous cleaning method:
Solvent or vapor cleaning with trichloroethane

Recommended process:
- Immerse bearings horizontally in a heated 40 kHz ultrasonic tank for 5 minutes; the tank holds a semi-aqueous solution at 52 °C, used at high concentration.
- Ultrasonic overflow rinse in 66 °C hot water for 90 seconds at a flow rate of 0.3 GPM; the effluent flows into a separation tank that separates soil and hydrocarbons from the water.
- Rinse in 71 °C hot water through three cascade tanks for 3 minutes at a flow rate of 1.5 GPM.
- Blow off with an air knife, then dry with a hot-air dryer at 116 °C

Cleaning system:
Semi-aqueous or continuous in-line cleaning equipment with dryer

Process advantages:
- Enhanced ability to remove ionic and organic contaminants
- No need to change the greases or lubricants currently used in the manufacturing process
- Better process control — a simple process requiring no complex monitoring
- Environmentally friendly — organic soil and hydrocarbons are separated from the wastewater, keeping the equipment well maintained