The service life of a horn depends on two key factors:
I. Material, II. Process
Material: ultrasonic welding requires metal materials with good compliance (low mechanical loss during acoustic transmission), so the most commonly used materials are aluminum alloys and titanium alloys.
Material is one of the main factors ensuring the service life of the ultrasonic mold and the quality of the welded product. The mold-making process is complex. Therefore, mold engineers must not only carefully select materials in their design, but also understand what material their product requires, avoiding impacts on service life and quality due to oversight.
The characteristics of various materials currently used are briefly described below:
I. Aluminum-magnesium alloys (7075-T651, 2024-T651, 6061-T651)
1. 7075T651: used for vibration systems and horn manufacturing. This material has extremely high mechanical yield strength, high hardness, and strong thermal conductivity, making it an ideal material for ultrasonic mold manufacturing;
2. 2024T651: generally used for horn manufacturing, with good toughness, strong thermal conductivity, and moderate hardness — used for general plastic products.
3. 6061T651: used for manufacturing horns with lower power output, with good toughness and a softer texture.
II. Titanium alloy: used for continuously oscillating models, with high toughness, good thermal conductivity, and high hardness, but expensive.
III. Domestic hard aluminum alloy: domestic material, used for ordinary aluminum processing, with low thermal conductivity, high ultrasonic mechanical loss, and low cost.
The following factors should be considered when producing an ultrasonic mold:
1、 Product requirements: determine the mold's service life and wear rate, thereby determining which metal to use.
2、 Product shape: determine which welding process to use, set the mold size, pressure transmission zone, possible deformation of the product during fusion, and how much power and what functions are needed. Can the work be completed in a single weld?
3、 Plastic properties of the product: determine the mold's working amplitude, which workpiece should receive the ultrasonic energy, and the form, position, and size of the energy directors. For different plastic combinations, how should the contact positions be designed?
4、 Quality after-sales service.
PreviousUltrasonic Transducer Operating TemperatureNextHow to Weld Plastic Pipes with an Ultrasonic Welding Machine