Ultrasonic transducers heat up during use, mainly for three reasons. First, the workpiece being welded heats up, or the substance being ultrasonically processed heats up, or the mold (tool head) and booster heat up after long operation — all of this heat is transferred to the transducer. Second, the transducer's own power loss. Since 100%  energy conversion efficiency cannot be achieved, the lost portion of energy inevitably turns into heat. Temperature rise causes the ultrasonic transducer's parameters to change, gradually deviating from the optimal matching state; more seriously, temperature rise degrades the performance of the piezoelectric ceramic chips. This in turn makes the ultrasonic transducer work in a worse state and heat up faster — a vicious cycle.
    So we must provide the ultrasonic transducer with good cooling conditions — generally ambient air cooling; if necessary, cold-air cooling can also be used. Under normal circumstances, the temperature rise caused by these two points is also normal, and under normal cooling conditions there will be no major problems.