Ultrasonic Automotive Plastic Welding:
Definition of ultrasonic welding: Ultrasonic welding is a high-tech joining technology for thermoplastic products. It replaces traditional production methods such as fluxes, adhesives, staples and other mechanical fastening, improving production efficiency and reducing cost. The principle of ultrasonic welding: an ultrasonic generator converts high-frequency electrical energy into high-frequency mechanical motion, which is then transmitted through an amplitude-adjustable booster to the horn. The horn transfers the received vibration energy to the joint of the workpieces to be welded, where the vibration energy is converted into heat through friction, melting the plastic. Ultrasonics is used not only for welding hard thermoplastics, but also for processing fabrics and films.
Advantages and Disadvantages of Ultrasonic Welding in the Automotive Industry:
Advantages of ultrasonic welding: fast, automatable.
Disadvantages of ultrasonic welding: limited by size, shape and material (ultrasonic welding mainly targets PP, PC, ABS, PA, PS, AMMA plastics).
Joint Design for Ultrasonic Welding:
Scarf Joint
Uses a beveled surface for full face contact. Uniform heat energy and a large weld area give high weld strength and good hermetic sealing.
Step Joint
A form of shear welding, where uniform heat is obtained from the contact surfaces along the direction of vibration; both hermetic sealing and weld strength are excellent. However, flash generated after welding remains on the surface, so pay special attention when no flash is allowed.
Shear Joint
Falls between the scarf joint and the step joint described above. With good hermetic sealing, it effectively welds shapes other than round ones, so it is frequently used.
Energy Director Joint
Concentrates energy on a raised triangular feature known as the energy director, a joint design in which heat is generated by repeated impact. Its advantages: simple shape and few restrictions on the joint area. However, for crystalline plastics, excessive localized heating causes softening and melting, leading to loss of weld stress, poor sealing and other problems — caution is required.