Plastic welding technologies for automotive parts:
Plastic welding is an essential process in modern machinery manufacturing and is widely used in automotive production. With technological progress, new welding processes, materials, and methods are continuously being applied to automotive manufacturing; the welding of coated steel sheets and light-metal materials, and the demands of polymer, composite, dissimilar, and special materials, pose new challenges to automotive welding. As the automotive industry increasingly replaces metal parts with plastic ones, the most advanced plastic welding technologies are needed to ensure production quality.
Laser welding:
Laser technology uses polarizing mirrors to reflect the laser beam and focus it into an enormously energetic beam; if the focal point is near the workpiece, the workpiece melts and vaporizes within milliseconds—an effect usable for welding. The key to laser welding equipment is the high-power laser, in two main categories: solid-state lasers, also called Nd: YAG lasers, and gas lasers, also called CO2 lasers, which use molecular gas as the working medium to produce infrared laser light averaging 10.6mm, capable of continuous operation at very high power, with standard laser power between 2 and 5 kW. Laser welding is characterized by minimal workpiece deformation, almost no joint gap, and a high depth-to-width ratio, giving higher weld quality than conventional welding methods. In the automotive industry, laser technology is mainly used for body tailor-welding, seam welding, and parts welding.
Plastic welding:
Ultrasonic plastic welding transmits high-frequency mechanical vibration through the workpiece to the joint, accelerating molecular motion. Molecular friction converts to heat that melts the plastic at the joint, truly fusing the two parts at the molecular level. Because this molecular motion happens in an instant, most ultrasonic plastic welds are completed within 0.25–0.5 s. Ultrasonic plastic welding suits small weld areas and regularly shaped thermoplastic parts. It has been successfully applied to automotive bumpers, instrument panels and clusters, brake indicator lamps, turn signals, door panels, and other engine-related component manufacturing. In recent years, many parts traditionally made of metal have begun to be replaced with plastic, such as intake manifolds, instrument pointers, radiator reinforcements, fuel tanks, and filters.
Vibration friction welding:
Vibration friction plastic welding rubs the workpieces against each other under pressure; energy is conducted along the weld zone, and at specially designed locations the plastic melts from frictional heat. After the melting phase, the joint cools and solidifies under continued pressure, with the solidified joint strength comparable to that of the base plastic. Vibration friction welding suits workpieces with large weld areas and complex structures, with no special requirements on plastic type.