Plastic hot staking technology is used to join parts made of different materials — connecting thermosetting plastic parts with thermoplastic parts, or connecting plastic parts with metal. It uses the plastic's own molded-in stakes, ribs, and standing walls, which pass through pre-punched holes in stamped metal structures and are pressed tight. The portions of the stakes protruding above the metal surface (hot stakes) are softened under controlled heat, then re-formed and clamped with specially shaped metal forming heads after cooling. With specifically shaped heads, flush staking, dome staking, curled-edge staking, standing-wall rib staking, mechanical forging, and hemmed encapsulation of the plastic stakes can all be achieved — a joining method that mechanically stakes materials of different compositions into an assembly. The joint resists embrittlement and is attractive, strong, and well sealed, enabling optimal structural design, the best combination of each material's mechanical properties, and greatly improved overall component performance with impact-resistant integral structure for a perfect fit. It is especially suited to long-term mechanical vibration, wide swings in ambient temperature and humidity, and extremely harsh natural environments.
"Plastic Hot Air Stake Assembly" (PHASA) — plastic hot-air staking assembly is the simplest, most reliable, and most cost-effective method of permanent fastening assembly. It allows multi-point staking with no adhesives, solvents, fillers, or fasteners added, and consumes little energy. The equipment is compact with a small footprint, and the process involves no vibration, no pollution, and no noise — environmentally friendly, energy-saving, fast, efficient, high-quality, and attractive. Metal-and-plastic components assembled this way are strong, tight, and stable, with high impact resistance, corrosion resistance, vibration resistance, and strong weatherability.
In short, all fastening points on the component are heated simultaneously, then re-formed under pressure with a cooled head and cooled into a staked joint. Many parts of different materials are combined into a strong integral component — proven superior to other common conventional methods, requiring no other filler materials, fewer production steps, and lower processing costs and material consumption.
PHASA is the English abbreviation of "Plastic Hot Air Stake Assembly", i.e., plastic hot-air staking assembly in Chinese.
With the rapid development and spread of new material technologies, plastics are widely used for their light weight, low friction, corrosion resistance, and ease of processing. However, due to injection molding processes, mold machining, equipment, and other factors, many plastic parts with complex shapes and large sizes cannot be injection molded in one shot. Secondary processing with plastic bonding and heat-sealing is therefore used — but it is inefficient, heat-sealing has major limitations, and adhesives are somewhat toxic, causing environmental pollution and labor protection issues. Conventional processes can no longer meet the development needs of the modern plastics industry, so a novel plastic processing technology was born: plastic hot staking.
Plastic hot staking assembly is a brand-new design concept for assembling thermoplastic materials with parts of incompatible materials. It is the simplest, most reliable, and most cost-effective method of permanent fastening assembly, offering high efficiency, energy saving, high quality, and attractive appearance. It allows multi-point staking with no adhesives, solvents, or fillers added. Applying this technology can replace the fluxes, adhesives, buckles, or other mechanical fastening methods — and other parts and materials — previously needed in production, reducing steps, raising production efficiency, and greatly lowering assembly costs and material consumption. Molded components assembled this way are strong, tight, and stable, with good vibration resistance, aging resistance, and impact resistance. Operation is simple, energy-saving, and fast; operators need no advanced skills, and product quality can be inspected by visual appearance.
In recent years, the application of plastics with metals and other composite materials has drawn increasing attention. The latest structural design theories, automotive part lightweighting, and the spread of various composite modified materials have placed higher demands on secondary processing. Plastic hot staking exactly compensates for the shortcomings of other processing methods, combining incompatible materials into an integral whole with optimal performance and function. It is a simple, clean, and efficient production method that fully satisfies the needs of various industries and is bound to see ever wider application in the future.