As science and technology continue to advance and market specialization becomes clearer, ultrasonic welding equipment has also been developed for different materials. For ultrasonic welding machines, the two main types on the market are ultrasonic metal welding machines and ultrasonic plastic welding machines.
    1. Ultrasonic Metal Welding Machines
    Ultrasonic metal welding machines use high-frequency vibration energy to weld the same or different metals under appropriate pressure through cold rubbing and horizontal motion, causing the surface molecules of the materials to interpenetrate and achieve welding. Ultrasonic metal welding is an efficient, highly reliable welding method with the following advantages:
    (1) The welded materials do not melt, preserving the metal's inherent characteristics.
    (2) Short welding time, with no need for any flux, gas, or solder.
    (3) Low requirements for the metal surface — oxidized or plated surfaces can be welded.
    (4) Good post-weld conductivity, with extremely low or near-zero resistance.
    (5) No sparks during welding — environmentally friendly and safe.
    2. Ultrasonic Plastic Welding Machines
    (1) With high-power ultrasonic welding machines, the plastic does not necessarily melt during welding — it depends on the specific parameter settings.
    (2) Ultrasonic plastic welding machines generally cannot be used for welding several pieces of plastic 2–3 mm thick, though special conditions are not excluded — factors such as structure, welding method, and ultrasonic machine power all have an impact.    
    (3) If a fine wire mesh needs to be sandwiched between two pieces of plastic during ultrasonic welding, a positioning method must be added so the mesh stays in place and does not shift when welded into the plastic; 
    (4) Thermoplastic raw materials are more ideal for ultrasonic welding — the most common being ABS, PVC, PC, acrylic, and similar materials. 
    (5) The welding result of an ultrasonic welding machine is related to surface finish — otherwise there would be no need to make energy directors on plastic molds. An "energy director" is an ultrasonic melt-guiding and positioning device, usually appearing as a contact line (or contact point) on the plastic mold. Therefore, in the ultrasonic welding industry, ultrasonic melt-guiding and positioning devices are collectively called energy directors.