An introduction to ultrasonic: scientists call the number of vibrations per second the frequency of sound, measured in hertz. The human ear can hear sound waves from 20 to 20000 Hz. When the vibration frequency of a sound wave is greater than 20 KHz or less than 20 Hz, we cannot hear it. Therefore, we call sound waves with frequencies above 20,000 hertz "ultrasonic." Ultrasound commonly used for medical diagnosis has a frequency of 1 to 5 MHz. 
    Ultrasonic applications in cleaning: The principle of ultrasonic cleaning is that high-frequency oscillation signals from the ultrasonic generator are converted by the transducer into high-frequency mechanical oscillation that propagates into the medium. Ultrasound radiates through the cleaning solvent in alternating compression and rarefaction, causing liquid flow and producing tens of thousands of tiny bubbles. The micro-bubbles (cavitation nuclei) in the liquid vibrate under the acoustic field; when the sound pressure reaches a certain value, the bubbles grow rapidly and then suddenly collapse, generating shock waves and thousands of atmospheres of pressure around them, breaking up insoluble contaminants and dispersing them in the cleaning liquid. When solid particles coated with oil adhere to the surface of the workpiece, the oil is emulsified and the solid particles detach, achieving surface purification of the cleaned part.
    Ultrasonic applications in medicine: Medical ultrasonic inspection works somewhat like sonar -- ultrasound is transmitted into the human body, and when it meets an interface it reflects and refracts, and may be absorbed and attenuated in body tissues. Because the form and structure of various human tissues differ, their reflection, refraction, and absorption of ultrasound differ accordingly. Doctors distinguish them through the waveforms, curves, or image characteristics shown by the instrument, combined with anatomical knowledge and normal versus pathological changes, to diagnose whether the examined organ is diseased.
    Ultrasonic applications in inspection: Ultrasonic imaging technology is widely used in medical examination, in the microelectronics device industry for inspecting large-scale integrated circuits, and in materials science for displaying regions of different components and grain boundaries in alloys. Acoustic holography is an acoustic imaging technique that uses the interference principle of ultrasound to record and reproduce three-dimensional images of opaque objects; its principle is basically the same as optical holography, differing only in the recording method.
    Ultrasonic applications in plastic welding: When ultrasound acts on the contact surfaces of thermoplastics, it produces high-frequency vibration tens of thousands of times per second. This high-frequency vibration of sufficient amplitude transmits ultrasonic energy through the upper part to the weld zone; since the acoustic resistance is high at the interface of the two weld surfaces, localized high temperature is generated. Because plastics conduct heat poorly, the heat cannot dissipate in time and accumulates in the weld zone, causing the contact surfaces of the two plastics to melt rapidly; with applied pressure they fuse into one. When ultrasound stops, maintain pressure for a few seconds to let it solidify and form -- creating a strong molecular bond and achieving the weld, with weld strength approaching that of the base material.
   Ultrasonic applications in metal welding: It is generally believed that in the initial stage of ultrasonic welding, tangential vibration removes oxides from metal surfaces, and repeated micro-welding and breaking of asperities on rough surfaces increases the contact area, while raising the weld zone temperature and causing plastic deformation at the workpiece interface. Under contact pressure, when the surfaces approach to within the distance where atomic attraction can take effect, weld spots are formed.