| Ultrasonic plastic welding machines are suitable for ABS, PP, PE, PC, PUC, PMMA, PS, PPS, PBT, PETG and other plastic materials, and are also used in plastics, electronics, electrical appliances, automotive parts, packaging, environmental protection, medical devices, nonwoven garments, stationery and daily goods, plastic toys, sporting goods, communications equipment and other industries.
|
Welding Problem
|
Solution
|
| Insufficient welding |
Increase weld time; increase the contact depth of the upper mold; increase pressure
|
| Excessive welding |
Reduce weld time; reduce pressure; decrease the contact depth of the upper mold
|
|
Weak joint surface on the welded part
|
Increase weld time; increase holding time; increase the contact depth of the upper mold; increase pressure |
|
Damaged product surface after welding
|
Reduce weld time; reduce pressure; check that the horn is properly positioned relative to the part; check that the part contacts the bottom fixture; check that the bottom fixture is secured |
| System overload |
Reduce pressure; adjust the frequency knob; check that the horn-to-booster joint is tight; switch to a higher-power welding machine |
| Uneven welding of the part joint surface |
Check the part dimensions (whether upper and lower match); add shims to the bottom fixture; redesign the bottom fixture or horn; check during welding whether the part moves; check that the part contacts the bottom fixture properly |
|