Components and Functions of the Ultrasonic Plastic Welding Machine:
    An ultrasonic plastic welding machine consists of a pneumatic drive system, a control system, an ultrasonic generator, a transducer, a tool head, and the mechanical structure. 
    1. Pneumatic Drive System 
    Comprising: filter, pressure reducing valve, lubricator, directional valve, throttle valve, cylinder, and more. In operation, an air compressor first drives the stroke cylinder to move the ultrasonic transducer vibration system up and down; the drive air pressure for small and medium-power ultrasonic welding is set to the welding requirement. 
    2. Control System 
    The control system consists of time relays or integrated-circuit timers. 
    Its main functions are: first, controlling the pneumatic drive system — opening the air circuit valve under timed control during welding so the cylinder pressurizes and lowers the horn to press the workpiece with a set force; after welding, holding pressure for a time, then the control system reverses the air circuit valve so the horn rises and resets. Second, controlling the ultrasonic generator’s operating time. The system fully automates the welding process: pressing the start button generates a trigger pulse that automatically completes the entire weld cycle. The full control sequence is: power on → trigger control signal → pneumatic drive system; cylinder pressurizes, horn descends and presses the weld → ultrasonic generator triggered, ultrasound emitted and held for the set weld time → ultrasound emission stops, pressure held for a set time → pressure released, horn rises, weld complete. 
    3. Ultrasonic Generator 
    ①For higher-power ultrasonic plastic welding machines, the generator uses a phase-locked frequency auto-tracking circuit so the generator output frequency closely matches the transducer’s resonant frequency. 
    ②For ultrasonic plastic welding machines above 500W, the generator uses a self-excited power oscillator, which also has a degree of frequency tracking ability.
    4. Ultrasonic Plastic Welding Machine Acoustic System 
    ①Transducer: the acoustic system of an ultrasonic plastic welding machine has three parts: 1) the drive section, 2) the mounting section, and 3) the working section. The drive section is the core, generally using bolt-clamped longitudinal-vibration transducers, including half-wavelength longitudinal vibrators and quarter-wavelength longitudinal vibrators. A half-wavelength longitudinal vibrator connected to a half-wavelength booster forms a full-wavelength plastic welding transducer, while a quarter-wavelength longitudinal vibrator connected to a quarter-wavelength booster forms a half-wavelength transducer. 
    ②Tool head: different welding targets need different tool heads; whether near-field or far-field welding, only a half-wavelength tool head lets the weld face reach maximum amplitude. Tool heads come in two types — with and without amplitude gain. The tool head of a plastic welder’s acoustic system is usually made of aluminum alloy with a cemented-carbide-coated end face; higher-power versions also use titanium alloy, whose fatigue strength is more than double that of aluminum alloy.