How to Test Ultrasonic Weld Strength
Whether a weld is truly strong cannot be judged by feel alone. Here are the commonly used test methods:
1. Tensile testing
Clamp the welded sample in a tensile tester and pull perpendicular to the seam, recording the maximum force at break. This is the most direct and widely used quantitative method. Keep sample dimensions consistent and average several runs for more meaningful results.
2. Peel testing
Best for films and fabrics. Peel slowly along the seam edge and observe peel force and failure mode to judge whether the weld is uniform and sound.
3. Air/water tightness testing
For products requiring sealing (trays, pipe fittings), pressurize with compressed air and watch for pressure drop, or immerse in water to check for leaks.
4. Visual and cross-section inspection
Check that seams are uniform with no scorching or distortion; cut through the weld when needed and examine fusion under magnification. We recommend inspecting the first piece of every shift plus periodic sampling during production.
5. Set up an inspection routine
We recommend a written weld inspection standard: sampling ratio, acceptance criteria, and how to handle rejects. Sample more often during trial production of new products, then switch to routine sampling once the process is stable. Let data — not guesswork — keep your weld quality consistent.