A single finished plastic part may consist of several materials or components; to join them, mechanical fasteners, adhesives or welding can be used. Of these three joining methods, welding gives the best results, and it comes in many forms that can be matched to different materials, sizes and applications. 
    Mechanical fasteners, adhesives and welding can all join two engineering plastics. Mechanical fasteners join two parts quickly, but their leak-proof performance is poor, and localized stress can separate the polymer materials. 
    Adhesives offer good performance and excellent leak-proof joints, but they are difficult to handle and cure slowly. Bonded joints also demand high standards of joint preparation and surface cleanliness. 
    Welding produces strong, reliable joints whose mechanical properties approach those of the parent material. Plastic welding is limited to thermoplastic polymers, since thermoplastics soften on heating. Thermosets cannot be softened by heating once cured. Compared with metals, thermoplastic polymers need far less heat to weld.
    Ultrasonic welding
    Ultrasonic welding forms joints through mechanical high-frequency vibration. The parts to be assembled are clamped under pressure between a vibrating horn and a fixed horn, then receive ultrasonic vibration at 20–40 kHz perpendicular to the contact face. Alternating high-frequency stress generates heat at the joint interface, producing a high-quality weld. The tooling for this process is expensive, so it is best suited to high-volume production. 
This method is only suitable for small parts with weld lengths of no more than a few centimeters. Applications include welding valves and filters for medical devices, housings, automotive parts and vacuum-cleaner housings on multi-horn machines. 
    Friction welding 
    Thermoplastic friction welding (also called "spin welding") works on the same principle as metal welding. In this process, one substrate is held fixed while the other rotates at a controlled angular speed. When the parts are pressed together, friction heat melts the polymer, and cooling forms the weld. Key welding parameters include: rotation speed, friction pressure, forge pressure, weld time and melt length. 
Friction welding produces excellent weld quality; the process is simple and highly repeatable. Because of that simplicity, however, it is only suitable for applications where at least one part is round and no angular alignment is needed. 
    Hot plate welding 
    For plastic joining, hot plate welding is the simplest mass-production technique. A high-temperature hot plate is clamped between the surfaces to be joined until they soften. The plate is then withdrawn and the two surfaces are brought together under controlled pressure, held for a specific time and then joined. The weld tooling or heating elements have built-in heaters to keep plastic from sticking to the tool. 
    Temperatures are typically 180–230 °C, depending on the thickness and type of material to be welded. This method is commonly used to weld the ends of plastic pipe for gas, water, sewage and drainage, and pipe used in the chemical industry; and to weld filler pipes and joints onto blow-molded automotive fuel tanks. 
    Many everyday products use this welding process, for example: vacuum-cleaner housings, washing-machine and dishwasher components, brake-fluid reservoirs, tail lights, indicator lamps and other automotive parts. The downside of hot plate welding is its slow speed. Small parts generally take 10–20 seconds to weld; large pipe can take up to 30 minutes.