Different welding jobs need different tool heads; whether near-field or far-field welding, only a half-wavelength tool head lets the welding face reach maximum amplitude. Tool heads come in amplitude-amplifying and non-amplifying types. For plastic welding machines, the acoustic-system tool head is usually made of aluminum alloy with a hard-alloy-plated face; for higher power, titanium alloy is also used, whose fatigue strength is more than twice that of aluminum alloy.
Ultrasonic welding horn materials:
I. Titanium alloy (7075, 2024, 6061)
① 7075: generally used in vibration systems and HORN manufacturing; high hardness, strong thermal conductivity, good toughness. This material has extremely high mechanical yield strength, high hardness and strong thermal conductivity — an ideal ultrasonic mold manufacturing material.
② 2024: generally used in HORN manufacturing; good toughness, strong thermal conductivity, moderate hardness; used for general plastic product welding.
③ 6061: generally used in bottom mold manufacturing or lower-output HORNs; good toughness, hardness second to 2024. Used in lower-output HORN manufacturing; good toughness, relatively soft.
II. SCM8: generally used for screw inserts and metal embedding; excellent toughness, high hardness, thermal conductivity second to 2024.
III. Titanium alloy: generally used for continuous oscillation; extremely high toughness, good thermal conductivity, high hardness, but expensive.
IV. Domestic hard aluminum alloy: uses domestic material for ordinary aluminum processing; low thermal conductivity, high ultrasonic mechanical loss, low cost.
Ultrasonic welding horn buying guide:
1. Product requirements: determine the mold's service life and wear rate, and hence which metal to use.
2. Product shape: which welding process to use, setting the mold size, pressure transmission area, possible deformation of the product during fusion, how much power and what functions are needed, and whether the job can be completed in one weld.
3. Plastic properties of the product: determine the mold's working amplitude, which part should receive the ultrasonic energy, and the form, position and size of the energy director. For different plastic combinations, how should the contact be designed?
4. The product's design producer: an excellent technical team and quality after-sales service.