Principle of the Plastic Welding Ultrasonic Generator:
    First, the signal ultrasonic generator produces a signal of a specific frequency — this signal can be sinusoidal or pulsed. This specific frequency is the frequency of the ultrasonic transducer; ultrasonic frequencies commonly used in ultrasonic equipment are 25 kHz, 28 kHz, 35 kHz, 40 kHz; 100 kHz and above are not yet widely used. But with the continuous development of precision cleaning, their use is believed to expand gradually. A well-designed ultrasonic generator should also have a feedback loop, mainly providing feedback signals in two aspects. 
    The first provides the output power signal. We know that when the ultrasonic generator's supply power (voltage) changes, the generator's output power also changes, which shows up on the ultrasonic transducer as mechanical vibration fluctuating in magnitude, making cleaning results unstable. The output power therefore needs stabilizing: the power feedback signal adjusts the power amplifier accordingly, stabilizing the power amplification.
    The second provides the frequency tracking signal. When the ultrasonic transducer works at its resonant frequency point, it is most efficient and most stable; but the transducer's resonant frequency point shifts due to assembly reasons and aging — though such shifts are only drift and not large. The frequency tracking signal can control the signal ultrasonic generator so its frequency tracks the transducer's resonant frequency point within a certain range, letting the ultrasonic generator work in its optimal state.
    Of course, with modern electronic technology — especially microprocessors (uP) and digital signal processors (DSP) — ultrasonic generators are becoming more powerful. But no matter how they change, their core functions should be as described above; only the implementation technology of each part differs.