Traditional processes for nut insertion: 
    1. In-mold injection: 
    Manual operation with poor consistency causes overmolding of the boss positions and an excessively high defect rate. Output is about 200 pieces per hour -- far too slow. 
    2. Old-style hot-melt machine: 
    Operators must judge nut orientation by eye focus, then use tools to install nuts into the housing and judge position; such repeated work easily causes visual fatigue. Nut placement requires 3-6 people plus 1 for hot melting -- a significant waste of labor. 
    Changing fixtures and preheating before nut insertion takes a while (1.5 hours); complicated operation and unstable temperature lead to low product quality. Housings loaded with nuts can easily lose nuts during handling. Speed constrains output, output constrains efficiency, directly affecting profit. 
    The process of the heat-stake nut insertion machine: 
    1. Vibration feeding section: 
    The operator only needs to pour copper nuts (matching the processing conditions and quantity) into the vibration bowl; the system automatically arranges the disordered nuts into an orderly line and feeds them into a flexible tube. Maximum feed rate is 200 pieces/min. 
    2. Heating and feeding section: 
    The copper nuts travel in order through the flexible high-temperature tube, enter the heating zone for preheating, and are then delivered to the manipulator ready for insertion. 
    3. Insertion section: 
    The heated copper nuts are delivered to the designated positions on the housing and automatically inserted into the plastic housing according to the preset program. 
    4. CNC section: 
    Programmed control drives the X, Y, and Z axis motors for precise positioning, and the manipulator accurately inserts the copper nuts into the corresponding positions. Any working mode can be selected. 
    Advantages of the CNC heat-stake insertion machine:        
    1. High production efficiency and fast changeover -- after a single setup, changeover at any time is very quick. Just recall the preset program number for the product and load the corresponding fixture. 
    2. Nut insertion uses point-to-point control; for any product within the 460mm x 130mm x 70mm working envelope, all motion modes can be programmed by the operator. 
    3. The heat-stake nut insertion machine is dual-station with 8 products; as long as the nuts are the same, it supports processing up to 4 different products simultaneously on one worktable.a