Hot air welding principle of the nonwoven filter bag hot air welder:
    The machine uses a steel structural frame with bolted and welded linkage structures plus a sliding guide rail structure. Electric heating transfers the heat from the heating blower to the weld area of the plastic parts on the table, melting and forming them; under the action of the pressure roller, the weld area on the table panel fuses, forms and cures rapidly to achieve the desired result, and under the action of the traction wheel the finished product slides out automatically. The filter bag hot air welder uses high-temperature hot air radiant heating so that the inside and outside of the filter cloth lap joint melt simultaneously, then are rolled, pressed and cured into shape in sync. The tooling consists of a heater configured to match the plastic parts, with a positioning structure that is easy and fast to install and adjust, with precise positioning, and a hot tool temperature range of 0–400°C. Nonwoven filter bags, medium/high-efficiency filter bags, air filter bags, liquid filter bags and other filter bag products are welded in a single pass. This technology is the first of its kind in China: the component structure is well designed, and the developed multi-core components fill a domestic gap.
    PP filter bag hot plate welding principle:
    With just one welder, curved and straight seams of PE and PO nonwoven filter bags can be made freely (operated as flexibly as a flatbed sewing machine), covering the production of filter bags in all common and special shapes and sizes: arc welds over 50 mm in diameter, center seams and bag side edges. After welding, the weld area has the same softness as the raw material, and overlock stitching can be added freely as a secondary safeguard. The welds completely eliminate secondary fraying, producing a true hot air welded filter bag.