Ultrasonic automotive plastic welding:
Definition of ultrasonic welding: ultrasonic welding is a high-tech technology for fusing thermoplastic products. Because this technology can replace the fluxes, adhesives, nails and other mechanical fastening methods used in production, it improves production efficiency and reduces cost. The ultrasonic welding principle: the ultrasonic generator converts high-frequency electrical energy into high-frequency mechanical motion, which is then transmitted through an amplitude-modulating device to the horn. The horn transmits the received vibration energy to the joint of the workpieces to be welded; in that region, the vibration energy is converted into heat by friction, melting the plastic. Ultrasound can weld not only hard thermoplastics but also process fabrics and films.
Advantages and disadvantages of ultrasonic welding in the automotive industry:
Advantages of ultrasonic welding: fast, automatable.
Disadvantages of ultrasonic welding: limited by size, shape and material (ultrasonic welding mostly targets PP, PC, ABS, PA, PS and AMMA plastics).
Ultrasonic weld joint design:
Bevel joint
Uses a bevel to achieve complete surface joining. Because uniform heat and a large weld area are obtained, weld strength is high and airtightness good.
Step joint
A shear weld: uniform heat is obtained from the face-contact joint in the vibration direction, with excellent airtightness and weld strength. However, the flash produced after welding remains on the surface — take care especially when no flash is allowed.
Shear joint
Between the bevel joint and the step joint described above; because of its good airtightness, it effectively welds shapes other than round ones, so it is often used.
Energy director joint
Concentrates energy on the raised triangular part called the director — a joint design in which heat from repeated impact creates the bond. Its advantages: simple shape, few restrictions on the joint. But for crystalline plastics, excessive localized heating causes softening and melting, leading to lost clamp-up stress, poor airtightness and other problems — be careful.