Hot Plate Welding in Automotive Plastic Welding — Advantages and Disadvantages:
    Advantages of hot plate welding: wide application range; high weld strength and high efficiency (the best among automotive plastic welding methods); airtight joints with good reliability; relatively easy design of product and weld geometry.
    Disadvantages of hot plate welding: heat from the hot plate softens the product, resulting in longer cycles; resin sticking to the hot plate causes stringing (appropriate anti-sticking measures must be in place); joining dissimilar resins or metal to resin may result in insufficient strength; for easily degradable materials, use inert gas.
    Definition of hot plate welding: a pressure welding method that softens the joint surfaces with heat from a hot plate. Thanks to its simple equipment and high weld strength, it has long been used for welding large plastic products.
    Hot plate welding process: bring the product into contact with the hot plate to melt the bonding area; keep the melted surfaces in contact to cool and solidify.
   Hot Plate Welding Conditions:
    Temperature setting: basically above the resin's melting point. At low temperature — long weld flash and low weld strength; at high temperature — watch for material aging.
    Softening time: allow enough time to fully soften the joint surfaces, referencing roughly 1 mm of softening.
    Mechanical drive speed: as fast as possible.
    Hot plate pressure: set the minimum required pressure and try welding. Excessive pressure squeezes out the molten resin, causing low strength.
    Other key factors affecting hot plate welding: cooling pressure, cooling time, hot plate template dwell time, cold press template travel time, and worktable reset time.
    Automotive Hot Plate Welding Equipment:
    Main components of the welding machine: bottom mold, clamping mechanism, heating plate, hot plate template, hot plate motion mechanism, cold press template, press plate motion mechanism, and worktable traverse mechanism.
    Main technical parameters: heating power, heating temperature, hot plate stroke, cold press plate stroke, total machine weight, and safety protection.
    Applications of automotive hot plate welding machines: automotive door panels, automotive plastic hot riveting, automotive parcel shelves, automotive fuel tanks and water tanks, automotive water/oil kettles, batteries, automotive taillights, automotive glove boxes, automotive rear parcel panels, automotive wheel covers, automotive instrument panel air ducts, automotive audio systems, etc.