Ultrasonic welding is one of the most commonly used plastic welding methods. Its basic principle is to apply high-frequency mechanical vibration (frequency 10–70 kHz, amplitude 10–100 μm) to plastic parts so that localized heating occurs under pressure (the heat results from the combined effect of surface and intermolecular friction) and the material melts to form the weld. During ultrasonic welding, the workpiece undergoes complex motion. The ultrasonic vibration transmitted through the workpiece forms a standing wave, with nodes of zero displacement and other regions of higher motion amplitude. The current view is that the joint interface must be placed at the point of maximum stress rather than maximum motion. Part geometry therefore plays an important role in how energy is transmitted to the joint and how it affects heating/melting at the joint interface. This shows that proper joint design is essential for a quality weld. Ultrasonic joints must be specifically designed to concentrate vibration energy at the melting point.
    There are two joint forms in ultrasonic welding. The first and main type has a triangular ridge (height 012–018 mm) on one of the mating surfaces, usually called an energy director (or energy-directing rib); its tip contacts the other flat surface, concentrating energy for rapid material melting. The ultrasonic vibration acts in the direction perpendicular to the mating surfaces. The second joint form is the shear joint, where one part is usually larger than the other. This joint does not use an energy director; a major component of the ultrasonic vibration is parallel to the mating surfaces, and heating is achieved mainly through interfacial friction (shear) forces. Shear joint designs are commonly used for welding semi-crystalline plastics or where water-tight seams or high joint strength are required.
    Ultrasonics is suitable for welding ABS, acrylic, polycarbonate, nylon, cellulose acetate, and more. Welding polyethylene and polypropylene has presented some difficulties — they generally require very high energy levels. Whatever the material, it must be dry, because moisture weakens joint strength. Ultrasonic welding is very fast (typical weld times from 015–115 s), easy to automate, and ideal for high-volume production.
    Ultrasonic welding applications in the automotive industry include: instrument panels, motor housings, bearing cages, lamp housings, glove boxes, lenses, filters, valves, air diverters (shunts) , airflow sensors, and more.
    With the demand for automotive lightweighting and the rapid development of the plastics industry, plastics are being used more and more widely in automobiles, and plastic welding methods have advanced considerably. The level of automotive plastic welding technology has become one of the benchmarks for automotive manufacturing technology and new material development. We can be confident that plastic welding methods will play an ever-wider role in the automotive industry.