An ultrasonic welding machine joins plastic parts by high-frequency mechanical vibration: the vibration creates frictional heat at the joint, fusing the surfaces without glue or screws. It is fast and widely used in automotive parts, electronics, medical devices, home appliances and packaging. The wrong choice can mean weak welds or damaged parts. These five steps will help you choose correctly the first time.

Step 1: Plastic or metal?

Decide this first — plastic welders and metal welders are not interchangeable. For plastics, use an ultrasonic plastic welding machine, such as the general-purpose 20kHz ultrasonic plastic welding machine. For metals (copper and aluminium wire harnesses, battery tabs), use an ultrasonic metal welder, such as our wire harness welding machine — metal welding is a solid-state process that does not melt the base material. If your parts are plastic, continue with the steps below.

Step 2: How weldable is your material?

Plastics differ greatly in weldability. Amorphous plastics such as ABS, PC, PS and PMMA weld easily; semi-crystalline plastics such as PP, PE, PA (nylon) and POM are harder to weld and need more energy plus a well-designed joint. If you are unsure, send us your parts — free sample welding is the safest way to confirm, and a test result says more than any datasheet.

Step 3: Match frequency to part size

Lower frequency means higher power and larger parts; higher frequency means finer vibration for small, precise parts.

FrequencySuitable partsNotes
40kHzSmall precision parts, thin walls, delicate insertsFine vibration, gentle on thin walls
35kHzSmall parts, precision partsGood balance of precision and power
28kHzSmall to medium partsVersatile all-rounder
20kHzMost plastic partsMost common, best balance of power and versatility
15kHzLarge parts, hard-to-weld materialsHigh power, suits large weld areas

For example: spot welding and repair of small plastic parts — a 40kHz handheld spot welder; general plastic part welding — a 20kHz standard machine; large parts — a 15kHz welder.

Step 4: Pneumatic or servo?

PneumaticServo
DriveAir cylinder, pressure set by air pressureServo motor, precise control of pressure, speed and position
Best forRegular volume production, economicalPrecision parts, multi-step processes, weld data traceability
PriceLowerHigher

Pneumatic is enough for regular volume production. For precision parts, multi-step processes or recorded weld data, choose a servo ultrasonic welding machine.

Step 5: Match the machine to the process

Not every job uses a standard welder: spot welding, riveting and repair of small plastic parts — a handheld spot welder; hot riveting and insert embedding for plastic parts with metal inserts — a servo hot riveting machine; large or complex-shaped plastic parts — a hot melt welder or hot plate welder. If you are unsure about the process, browse our products or call our engineers at +86 15618952290.

Step 6: Verify with a sample test before deciding

Datasheets only narrow down the candidates — a sample test makes the final call. Send us your parts and we will weld-test them free of charge, confirming weld strength and appearance before you order. Standard machines are generally delivered within 3 weeks; custom-built machines take typically 10–12 weeks. The whole machine carries a one-year warranty; custom tooling and moulds are generally covered for two months. See our FAQ or contact us for more.