20K Ultrasonic Metal Spot Welder for Hardware — Description
The 20K ultrasonic metal spot welder is a versatile machine for welding similar or dissimilar metal parts that require relatively low energy. It converts high-frequency electrical energy into mechanical vibration via the transducer; the vibration produces high-frequency friction between the two workpieces until their surfaces heat up and fuse. Under proper pressure, scrubbing and lateral motion interdiffuse the metal surface molecules to form the weld. It is ideal for single-point, multi-point, square, strip, single-layer, multi-layer and composite welding of fine, thin aluminum, nickel, copper and silver materials, and is widely used for spot and strip welding of thyristor chip leads, fast-acting fuse elements and holders, electrical lead terminals, and lithium-ion, NiMH and NiCd battery tabs.
It serves the hardware, battery, electronics, automotive, motor and electrical industries, including: aluminum strip to aluminum cover welding, multi-point nickel strip to copper foil welding, strip aluminum strip to aluminum foil welding, multi-point aluminum strip to aluminum foil welding, nickel strip to aluminum strip, nickel strip to copper foil, multi-layer nickel strip to copper foil, multi-layer aluminum strip to aluminum foil, aluminum case to aluminum-nickel clad strip welding, copper tube end sealing, automotive wire harnesses, motor terminals and more.

Welding Features of the 20K Ultrasonic Sheet/Foil/Strip Spot Welder
☆ The 20K ultrasonic lithium-battery metal spot welder offers two weld modes — “Time” and “Energy” — with automatic frequency control and overload protection;
☆ The 20K ultrasonic wire-harness terminal spot welder is easy to operate with built-in electronic protection circuits for safe use;
☆ No pre-treatment of the weld area is needed (a moderate oxide layer or insulation will not affect weld quality);
☆ Stepless adjustment of horn descent speed and pressure keeps the tooling in the optimal weld position and motion;
☆ The advanced 20kHz ultrasonic control cabinet with microprocessor control module ensures the best weld results and provides test, alarm and counting functions.

Advantages of the 20K Ultrasonic Battery Tab Spot Welder
1. High reliability: excellent process control through time, energy, power and upper-limit monitoring.
  2. Cost savings: no consumables such as solder, flux or brass — ultrasonic welding is the most economical joining process.
  3. Low energy consumption: less than 1/3 the energy of resistance welding, with no preheating required.
  4. Long tool life: ultrasonic tooling is precision-machined from high-quality tool steel for excellent wear resistance, easy installation and high weld accuracy.
  5. High efficiency and automation: typical weld time under 0.5 seconds, compact size, minimal maintenance and strong adaptability make it the first choice for automated assembly lines.
6. Low working temperature: ultrasonic welding generates little heat, so it will not anneal metal parts or melt plastic housings, and no cooling water is needed.
  7. Insulation displacement: in most cases the high-frequency friction eliminates the need to strip enamel insulation from magnet wire or pre-clean workpiece surfaces.Wire Harness Welding MachineWire Harness Welding Machine