Currently, the most commonly used plastic welding methods are ultrasonic welding, laser welding, hot plate welding, friction welding, vibration welding, high-frequency welding, hot air welding, and induction welding. There is no best method — only the right one.
Ultrasonic welding is characterized by heat concentrated only in the welding area, with strong and attractive welds; regardless of the plastic's polarity, almost all heat-meltable plastic films can be ultrasonically welded — it is especially suitable for welding rigid films.
Advantages of laser welding plastics: precise, strong weld seams that are airtight and watertight, allowing component surfaces to be tightly joined; less resin degradation and fewer fragments during welding; significantly reduced vibration stress and thermal stress on products compared with other fusion methods; capable of welding various different plastics together; excellent at welding products with complex shapes; can weld areas difficult to reach by other methods; easy to control with good adaptability;
Hot plate welding is mainly suited to welding the same type of thermoplastic; the melting temperature of the same plastic is easy to control, making temperature control of the heating plate relatively easy and simplifying its manufacture. When welding different types of plastics, temperature differences between the two plastics make the heating plate more difficult to manufacture and process, and insufficient strength may occur.
Advantages of friction welding: high productivity, easy automation and mechanization; when welding one material, joint performance is good, with simple equipment and convenient operation. Friction welding technology has a wide range of applications, capable of welding automotive half shafts, valves, airbags, turbochargers, integral gears, coupling gears, constant velocity joints, front suspensions, and more.
Vibration welding: used for almost all thermoplastic plastics. Best suited for welding injection-molded or compression-molded engineering thermoplastics, and can also weld fluoropolymers, polyester elastomers, and other plastics that ultrasound cannot weld.
High-frequency plastic welding is used for common plastics, leather, and fabrics; accurate positioning with good, flexible performance; used for smaller product processing with high production efficiency and simple operation.
Induction welding is a very fast and versatile welding method, effective for all thermoplastic plastics, with weld strength meeting service requirements in most cases. Its disadvantages are high equipment investment and lower weld strength than other welding methods. Careful consideration should be given when choosing it.