Ultrasonic Spot Welder

  How an ultrasonic spot welder works: an ultrasonic generator converts 50/60 Hz current into 15, 20, 30, or 40 kHz electrical energy. The converted high-frequency electrical energy is converted again by the transducer into mechanical motion of the same frequency; the mechanical motion is then transmitted through a booster assembly that can change the amplitude to the horn. The horn transmits the received vibration energy to the joint area of the workpieces to be welded; in that region, the vibration energy is converted into heat through friction, melting the plastic. After vibration stops, brief pressure maintained on the workpieces lets the two parts solidify as one through molecular bonding. Typical weld time is under 1 second, and the resulting weld strength can rival that of the parent material. Ultrasonics can be used not only to weld rigid thermoplastics but also to process fabrics and films. The main components of an ultrasonic welding system are the ultrasonic generator, the transducer/booster/horn stack, the mold, and the frame.
  An ultrasonic spot welder can be used for butt welding of thermoplastics, and the horn can be changed per customer requirements for rivet welding, spot welding, embedding, trimming, and other processes. Compared with traditional processes (adhesive bonding, hot pressing, or screw fastening), it offers significantly higher production efficiency, better weld quality, and environmental and energy-saving benefits. The ultrasonic spot welder uses imported piezoelectric ceramic crystals for high efficiency and long life; an original vertical room-temperature circulating self-cooled ultrasonic generator with the lowest failure rate in the industry; a cast aluminum-alloy integral frame ensuring machine rigidity; a rack-and-pinion lifting mechanism for easy operation and precise positioning; both automatic and manual operating modes for easy debugging; an optional ergonomically designed cabinet worktable; an automatic counter, plus a reserved foot-switch interface. An ultrasonic spot welder is mainly used for workpiece positioning and load bearing; profile-engraved and polished metal tooling or resin-cast tooling protects workpiece surfaces from scratches, and the tooling can also be made into automatic tooling linked with the welder to improve the operating mode or raise production efficiency. An ultrasonic spot welder can also be used for welding, riveting, and spot welding of thermoplastic products, as well as insert and edge-pressing processes between metal and plastic parts. It replaces outdated chemical organic solvent adhesive bonding, featuring low energy consumption, high efficiency, no deformation, no pollution, strong welds, and easy operation. The product uses advanced circuitry, program control, pneumatic drive, automatic over-current protection, and safe-operation protection circuits; the circuitry uses a plug-in board structure for easy maintenance and replacement; it is also designed with an electronic delayed-welding device. The new 15 kHz ultrasonic plastic welding machine has unique advantages for welding softer PE and PP materials and for plastic parts of extra-large diameter and extra-long length, meeting the needs of various products and helping users improve production efficiency and product quality.

How the Ultrasonic Spot Welder Works

  

It converts 220 V, 60 Hz into 28 kHz high-voltage electrical energy, which is converted into mechanical energy by the vibrator. This mechanical vibration is transmitted through the booster and the horn to the workpiece, and the heat generated breaks its molecular structure so the workpiece surfaces melt and join — with bond strength comparable to the parent plastic itself.