Polypropylene
English name: Polypropylene
Molecular formula: [C3H6]n
Abbreviation: PP,
A thermoplastic resin made by polymerizing propylene, with three configurations — isotactic, atactic and syndiotactic — industrial products being mainly isotactic. Polypropylene also includes copolymers of propylene with a small amount of ethylene. It is usually a translucent colorless solid, odorless and non-toxic. Due to its regular structure and high crystallinity, its melting point reaches 167°C; heat resistance — products can be steam-sterilized — is its outstanding advantage. Density 0.90g/cm3, the lightest general-purpose plastic. Corrosion resistant, tensile strength 30MPa; strength, rigidity and transparency are all better than polyethylene. Its disadvantages are poor low-temperature impact resistance and a tendency to age, which can be overcome by modification and by adding antioxidants respectively.
How a PP plastic welding machine works:
Ultrasonic metal welding uses the energy of high-frequency vibration to weld the same or dissimilar metals: under appropriate pressure, cold grinding and horizontal motion intermingle the surface molecules of the materials, achieving the weld.
Advantages of PP plastic welder welding:
1. The welded material does not melt; metal characteristics are not embrittled. 2. Good electrical conductivity after welding, with extremely low or near-zero resistance. 3. Low requirements on the metal surface to be welded — oxidized or plated surfaces can be welded. 4. Short weld time; no flux, gas or solder needed. 5. No sparks during welding — environmentally friendly and safe.
Features of the PP plastic welding machine:
(1) The two workpieces are overlapped and joined into a solid form by ultrasonic vibration under pressure; joining time is short and the joint produces no cast-structure (rough surface) defects.
(2) Compared with resistance welding, ultrasonic welding gives longer mold life, less mold dressing and replacement time, and is easy to automate.
(3) Ultrasonic welding works between the same metals and between dissimilar metals, consuming far less energy than electric welding.
(4) Compared with other pressure welding, ultrasonic welding needs less pressure, with deformation under 10%, while cold pressure welding deforms the workpiece by 40%–90%.
(5) Unlike other welding, ultrasonic welding needs no pre-treatment of the surfaces to be welded and no post-weld treatment.
(6) Ultrasonic welding needs no external factors such as flux, metal filler or external heating.
(7) Ultrasonic welding keeps the thermal effect on the material to a minimum (the weld zone temperature does not exceed 50% of the absolute melting temperature of the metal being welded), so the metal structure does not change — making it very suitable for welding applications in the electronics field.