Automotive Hot Staking Process: 
    Plastic hot staking technology is used to join parts made of different materials — connecting thermosetting plastic parts with thermoplastic parts, or connecting plastic parts with metal. It uses the plastic's own molded-in stakes, ribs, and standing walls, which pass through pre-punched holes in stamped metal structures and are pressed tight. The portions of the stakes protruding above the metal surface (hot stakes) are softened under controlled heat, then re-formed and clamped with specially shaped metal forming heads after cooling. With specifically shaped heads, flush staking, dome staking, curled-edge staking, standing-wall rib staking, mechanical forging, and hemmed encapsulation of the plastic stakes can all be achieved — a joining method that mechanically stakes materials of different compositions into an assembly. The joint resists embrittlement and is attractive, strong, and well sealed, enabling optimal structural design, the best combination of each material's mechanical properties, and greatly improved overall component performance with impact-resistant integral structure for a perfect fit. It is especially suited to long-term mechanical vibration, wide swings in ambient temperature and humidity, and extremely harsh natural environments. 
    Automotive Hot Staking Technology:
    Plastic hot staking assembly is the simplest, most reliable, and most cost-effective method of permanent fastening assembly. It allows multi-point staking with no adhesives, solvents, fillers, or fasteners added, and consumes little energy. The equipment is compact with a small footprint, and the process involves no vibration, no pollution, and no noise — environmentally friendly, energy-saving, fast, efficient, high-quality, and attractive. Metal-and-plastic components assembled this way are strong, tight, and stable, with high impact resistance, corrosion resistance, vibration resistance, and strong weatherability. 
    In short, all fastening points on the component are heated simultaneously, then re-formed under pressure with a cooled head and cooled into a staked joint. Many parts of different materials are combined into a strong integral component — proven superior to other common conventional methods, requiring no other filler materials, fewer production steps, and lower processing costs and material consumption.