| Plastic Ultrasonic Welding Technology:
Plastic ultrasonic welding is a heat-joining method that uses ultrasound to rapidly fuse the molecules at the contact surfaces of plastic parts. An ultrasonic generator converts low-frequency electrical energy into 20–40 kHz high-frequency electrical energy; the transducer converts it into longitudinal mechanical vibration of the same frequency. This vibration is transmitted through the booster and horn to the weld specimen placed on the base; under the dynamic mechanical force of the mechanical vibration, the surface temperature of the weld zone specimen rises and melts, extruding a molten layer of a certain thickness. After welding, pressure is maintained for a certain time until the molten layer cools and solidifies into a reliable joint.
Introduction to Ultrasonic Welding Technology:
Plastic ultrasonic welding offers short cycle time, no surface damage, no heating of non-weld areas, and other advantages, and is now widely used in aerospace, instrumentation, food packaging, and more. To date, researchers in various countries have done extensive research on it, mainly focusing on welding process parameters, the welding process, and welding equipment. This article reviews research progress on weld quality from three aspects — welding equipment, welding materials, and process parameters — and introduces advances in weld quality control methods and inspection techniques.
Development of Ultrasonic Plastic Welding Technology Abroad:
The plastic ultrasonic welding process developed from metal ultrasonic welding. It was first proposed by Jones and others in the United States in 1950. After the 1960s, the United States, Japan, Switzerland, the United Kingdom, Germany, and the former Soviet Union began using this technology in actual production. Branson and Sonic Power in the US, Kaijo Denki and Panasonic in Japan, KLN in Germany, as well as Russia and Sweden, all developed and produced plastic ultrasonic welding equipment, generally operating at 20–40 kHz with power from several hundred watts to tens of kilowatts. Current research on welding equipment focuses on increasing welding power and frequency and adopting new vibration modes — ultrasonic vibration systems above 40 kHz have emerged, along with equipment using transverse, torsional, and longitudinal–transverse compound vibration modes, for welding materials with poor acoustic emission characteristics. In addition, Tian Xiubo and others studied the pneumatic pressurization system of plastic ultrasonic welders, developing a plastic ultrasonic welder with variable pressure for better weld quality.
|