(I) Welding techniques that soften the material with an external heat source include:
1. Hot plate welding is probably the simplest plastic welding technique, and it is especially suited to large plastic parts requiring large weld areas: generally a flat electric hot plate melts and softens the two flat surfaces to be welded, then the hot plate is quickly removed and the two surfaces are joined and pressed together until cool. This method uses simple welding equipment and gives high weld strength, and the design of the product and weld shape is relatively easy. But the heat from the hot plate softens the product and the cycle is long; molten resin sticks to the hot plate and is hard to clean (coating the hot plate surface with F4 reduces this), and over time impurities form that affect bond strength; pressure and time must be strictly controlled to ensure the proper melt amount; when joining different kinds of resin, or metal to resin, insufficient strength can occur.
2. Hot air welding — when the hot air stream blows directly onto the seam area, the filler wire of the same material as the base material in the seam area melts. The weld is formed by melting the filler material together with the plastic being welded. This welding equipment is light and easy to carry, but demands high welding skill from the operator.
3. Hot bar and impulse welding — these two techniques are mainly used to join thin plastic films of small thickness. The two methods are similar: two films are pressed tightly together and the instantaneous heat from a hot bar or nichrome wire completes the weld.
(II) Methods that soften the material through mechanical motion to complete the weld include:
1. By motion path they are divided into linear and rotary types: the linear type is used for straight seams and flat welding, the rotary type for circular seams. Under pressure, the frictional heat generated as the two parts rub against each other melts and softens the plastic at the contact area; the parts are aligned and fixed until the joint solidifies firmly.
2. Ultrasonic welding — ultrasonic welding uses high-frequency mechanical energy to soften or melt thermoplastic at the joint. The parts to be joined are fixed together under pressure, then subjected to ultrasonic vibration at a frequency usually of 20 or 40 kHz; the transducer converts the high-power vibration signal into corresponding mechanical energy applied to the contact interface of the plastic parts to be welded, and the joint rubs violently, instantly generating high heat so that the molecules fuse alternately, achieving the weld. The ultrasonic welding process is very fast — weld time is less than a second — and it is easily automated; it is widely used in electronics, electrical appliances, auto parts, plastic toys, stationery, daily goods, crafts, cosmetics and other industries. Motion-based welding is an automatic welding process, all requiring dedicated welding equipment. Once the correct welding parameters are set, the operator can produce steadily. Its advantages: fast, flexible, short stable weld cycles, no flux or shielding gas needed, no harmful gases or slag produced, and guaranteed weld quality.
3. High-frequency welding — high-frequency welding uses the electromagnetic induction principle — high-frequency induction heating technology — penetrating the plastic product to induction-heat the susceptor buried inside the plastic part or magnetic plastics; the plastic to be welded generates heat in the rapidly alternating electric field, quickly softening and melting the area to be welded, then filling the interface gap, assisted by well-designed mechanical devices to achieve a perfect weld. The most common way to generate high-frequency induction is to pass high-frequency current through a coil, producing a strong high-frequency magnetic field. The susceptor (i.e., the heating element) is generally made of iron, aluminum, stainless steel or similar materials, but magnetic composite plastics made by adding magnetic substances are also used. Products welded by this method include stationery clips, inflatable items, waterproof clothing and blood bags.