How Hot Plate Welding Works:
    The hot plate welding machine mainly welds plastic parts with a temperature-controlled heating plate. During welding, the heating plate is placed between two plastic parts; when the workpieces press against the heating plate, the plastic begins to melt. After a preset heating time, the plastic on the workpiece surfaces reaches a certain degree of melting. The workpieces then separate, the heating plate moves away, and the two parts are brought together. After the hot plate stops acting, pressure is maintained for a few seconds to let the joint solidify, forming a strong molecular chain that achieves the weld. The weld strength can exceed that of the base material, and the entire welding process is complete. 
    Working Steps of the Hot Plate Welding Machine:
    (1) Reset state: the equipment is stopped or at the start of a work cycle; while the whole cycle is in automatic mode, the plastic parts to be welded are manually placed in the upper and lower molds (the molds have built-in vacuum suction cups that clamp the plastic parts); 
    (2) Hot plate advance: the start button is pressed, the hot plate slides to the heating position driven by the cylinder, and the upper and lower cold molds move simultaneously to the hot melt position driven by 2 cylinders, bringing the weld surfaces of the upper and lower plastic parts into contact with the hot plate to hot-melt the weld surfaces of the plastic parts; 
    (3) Plastic parts hot-melt state: within the preset fusing time, fully melt the upper and lower plastic parts without carbonizing them; 
    (4) When the fusing time is up, after the upper and lower plastic parts in the upper and lower molds move a safe distance away from the hot plate, the hot plate immediately retracts to the home position; 
    (5) The upper and lower plastic parts close under the action of the upper and lower cylinders; within the preset curing time, the two plastic parts fuse into one; the upper vacuum suction cup releases the welded plastic part's top cover, the upper and lower platens reset to state (1), the lower vacuum suction cup releases, and the welded plastic part is manually removed — the machine stands by for the next welding cycle.