Compounding: Besides polymers, plastic processing raw materials generally require various plastic additives (stabilizers, plasticizers, colorants, lubricants, reinforcements and fillers, etc.) to improve the molding process and product performance or to reduce product cost.
    Molding: The key step in plastic processing — making various forms of plastic (powder, pellets, solutions or dispersions) into products or blanks of the required shape. There are more than thirty molding methods. The choice mainly depends on the plastic type (thermoplastic or thermosetting), the starting form, and the shape and size of the product. Common methods for processing thermoplastics include extrusion, injection molding, calendering, blow molding and thermoforming; thermosets are generally processed by compression molding and transfer molding, as well as injection molding.
    Machining: Borrowing metal and woodworking methods to make plastic products with very precise dimensions or in small quantities, or as an auxiliary step to molding, such as sawing extruded profiles. Since plastics differ from metal and wood — poor thermal conductivity, low thermal expansion coefficient and elastic modulus — excessive clamping or tool pressure easily causes deformation; cutting heat easily melts the plastic, which also tends to stick to the tool. Therefore, the tools and corresponding cutting speeds used in plastic machining must suit the characteristics of plastics. Common machining methods include sawing, shearing, punching, turning, planing, drilling, grinding, polishing and thread machining.
    Joining: Methods of joining plastic parts include welding and adhesive bonding. Welding methods include hot-air welding with a welding rod, hot-plate hot-melt welding, as well as high-frequency welding, friction welding, induction welding and ultrasonic welding. Adhesive bonding can be classified by the adhesive used into solvent, resin-solution and hot-melt adhesive bonding.
    Surface finishing: Intended to beautify the plastic product surface, usually including: mechanical finishing — using filing, grinding, polishing and other processes to remove flash and burrs from the part and correct dimensions; coating — covering the part surface with paint, brightening the surface with solvents, or laminating patterned film onto the product surface; coloring — including painting, printing and hot stamping; metal plating — including vacuum coating, electroplating and chemical silver plating. Among these, hot stamping transfers the colored aluminum foil layer (or other patterned film layers) of the stamping foil onto the part under heat and pressure. Many household appliances, building products and daily necessities use this method to obtain metallic luster or wood-grain patterns.
    Assembly: The operation of assembling finished plastic parts into a complete product by bonding, welding and mechanical connection. For example: plastic profiles are assembled into plastic window frames and doors through steps such as sawing, welding and drilling.