A plastic hot plate welding machine consists of the pneumatic transmission section, control section, electrical section, machine base, hot plate mold, and mechanical devices.
I. Pneumatic Transmission Section
This section includes: filter, pressure-reducing valve, oil mister, reversing valve, throttle valve, cylinders, etc.
When the plastic hot plate welding machine works, an air compressor first drives the stroke cylinder to move the hot plate mold system up and down; the pneumatic pressure during the welding process of the hot plate welding machine is set according to the plastic part being welded.
II. Control Section
The control section consists of a PLC and a temperature controller. Its main functions are: first, controlling the pneumatic transmission system -- under timed control during welding, it opens the air circuit valve; the cylinder pressurizes to lower the horn, pressing the workpiece with a certain pressure; after welding, it holds pressure for a while, then the control system reverses the air circuit valve so the horn rises and resets. Second, controlling the heating time of the plastic parts on the hot plate. This system automates the entire welding process -- the operator only presses the start button to generate a trigger pulse, and the machine automatically completes the full welding cycle. The control sequence is: power start -- trigger control signal -- pneumatic transmission system; cylinder pressurizes, clamping molds descend and press onto the upper/lower hot plate molds to work, maintaining a certain weld time -- continue holding pressure for a set time -- release pressure, clamping molds rise -- welding ends.
III. Electrical Section
Touch screen and (programmable) controller, magnetic switches, and electric heating tubes. The electrical section is divided into two parts: the hot plate temperature control system and the programmed control system for the movement of the upper/lower templates and the hot plate mechanism. In the heating plate temperature control system, three-phase 380V power is introduced through an air switch, and the temperature controller controls the on/off of the three-phase solid-state relay (SSR) to supply heating current to the heating tubes in the hot plate. Thermocouples embedded in the heating plate feed back temperature signals to the temperature controller, achieving temperature control of the heating plate. The temperature controller uses intelligent control of the SSR output current. The circuit also has two AC ammeters to monitor the on/off and magnitude of the three-phase current. The heating temperature can be preset and adjusted on the temperature controller panel according to the heating plate's processing temperature requirements.
IV. Mold and Mechanical Device Section
This section uses a slide-plate structure; electric heating transfers the heating plate's heat to the weld surfaces of the upper and lower plastic parts, melting their surfaces. Then the heating plate is quickly withdrawn, and the two plastic parts are quickly pressed together by 2 cylinders, so the heated weld surfaces rapidly fuse and solidify into one. The machine is frame-type, composed of three major modules: the upper mold fixed positioning structure, the lower mold fixed positioning structure, and hot plate integration. The machine is equipped with two copper heating plates, moved forward and backward by cylinders -- convenient to use.
The heating plate is heated by electric heating tubes; the temperature controller controls the temperature range. Once set, the temperature regulates automatically; the actual temperature and the target heating temperature are displayed on the panel, and users can make actual adjustments according to the plastic parts' welding needs.