Factors Affecting Ultrasonic Welding Quality:
Ultrasonic welding is mainly used for the secondary joining of injection-molded parts and in plastic part assembly (e.g., joining the upper and lower plastic shells of a power adapter), so plastic weld quality and product appearance matter a great deal. The weld quality of an ultrasonic welding machine is influenced by the following 9 factors — to control weld quality well, all nine must be managed.
1. Material;
2. structure of the plastic part;
3. position and design of the weld line;
4. size of the weld surface;
5. position and fit of the upper and lower surfaces;
6. contact surface between the horn and the plastic part;
7. a smooth welding path;
8. support of the bottom fixture.
Three main design principles to follow:
1. The two surfaces that first come into contact must be small, so as to concentrate the required energy and minimize the total energy (i.e., weld time) needed to complete the weld;
2. Find a suitable method of fixing and alignment, e.g., plug-in holes, steps or tongue-and-groove joints on the plastic parts;
3. The weld surfaces around the joint interface must be uniform and in close contact with each other. If possible, keep the contact surfaces in the same plane so energy conversion stays consistent.