The weld quality of an ultrasonic welding machine is affected by the following 9 factors, so to control ultrasonic weld quality, these eight aspects must be managed well.
① Material;
② Structure of the plastic part;
③ Position and design of the weld line;
④ Size of the weld surface;
⑤ Position and tightness of the upper and lower surfaces;
⑥ Contact surface between the horn and the plastic part;
⑦ A smooth welding path;
⑧ Support of the bottom mold.
Three main design directions to follow:
① The two surfaces making initial contact must be small, to concentrate the required energy and minimize the total energy needed (i.e., the joining time) to complete the fusion;
② Find suitable fixing and alignment methods, such as plug holes, steps or rabbets in the plastic part;
③ The weld surfaces around the joint interface must be uniform and in close contact with each other. If possible, keep the contact surfaces on the same plane so that energy conversion stays consistent.