How an ultrasonic welding machine works:   
    An ultrasonic welder uses an ultrasonic generator to convert 50/60 Hz current into 15, 20, 30 or 40 kHz electrical energy. The converted high-frequency energy is converted again by the transducer into mechanical motion at the same frequency, which is then transmitted through an amplitude-modulating device to the horn. The horn delivers the received vibrational energy to the joint of the workpieces to be welded, where the vibration energy is converted into heat by friction, melting the plastic. Ultrasound can be used not only to weld rigid thermoplastics but also to process fabrics and films.
    How a laser welding machine works:   
    A laser welder works by shining a light/laser beam through one plastic part onto the surface of another (the weld face); the weld face fully absorbs the beam energy, heats up and melts; a controlled clamping force is then applied to the two plastic parts so they bond tightly together. Compared with other existing plastic welding processes, the laser process has the advantage that the light/laser beam can heat and weld the entire weld face at once, for more effective welding.  
    How a linear vibration friction welder works: 
    Linear vibration friction welding melts the plastic using the frictional heat generated at the contact face of the two workpieces. The heat comes from one workpiece reciprocating across the surface of the other with a certain displacement or amplitude under pressure. Once the desired weld is achieved, the vibration stops while pressure is still applied to the two workpieces, so the freshly welded area cools and solidifies into a tight bond.  
    How an orbital vibration friction welder works:   
    Orbital vibration friction welding uses friction heat to weld. During orbital vibration friction welding, the upper workpiece moves in an orbital motion at a fixed speed — a circular motion in all directions. The motion generates heat that brings the weld areas of the two plastic parts to their melting point. Once the plastic starts to melt, the motion stops and the weld areas of the two workpieces solidify and bond firmly together. A small clamping force causes minimal workpiece deformation; workpieces up to 10 inches in diameter can be orbital vibration friction welded.  
    How a spin welder works:   
    Spin friction welders are generally used to weld two round thermoplastic workpieces. During welding, one workpiece is fixed to the base mold while the other spins on the surface of the fixed workpiece. Because pressure is applied to the two workpieces, the friction heat between them melts the contact faces and forms a firm, sealed joint. 
    How a hot plate welding machine works:   
    A hot plate welder joins plastic parts mainly through a temperature-controlled heating plate. During welding, the heating plate is placed between the two plastic parts; when the workpieces press against the heating plate, the plastic starts to melt. After a preset heating time, the plastic on the workpiece surfaces reaches a certain degree of melting; the workpieces are then separated to the sides, the heating plate is removed, and the two workpieces are pressed together. Once the specified weld time and weld depth are reached, the whole welding process is complete.